Hi Chapelcorner,
If you're a Repco store owner how is your business travelling?
One thing I can say is that Auto crappy One is using the cheap Chinese parts. I've had to replace my front wheel bearings three times. First two times using Auto crappy One Chinese bearings and the last set were genuine Nissan (Timken).. The genuine bearings are great!
The silly thing is that it cost me $70 a set from Auto crappy One so that's $140 down the tube. The genuine Nissan parts cost me $45! Go figure! The genuine was cheaper that the Chinese crap! So something that should have cost me $45 ended up costing $185.
I'm not impressed and have learnt a big lesson. Use either genuine parts or something made in Australia, Japan or USA. The Chinese stuff is simply crap.
Regards
Quik.
- Forums
- ASX - General
- RCL
- does anyone follow repco ?
does anyone follow repco ?, page-7
-
-
- There are more pages in this discussion • 25 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add RCL (ASX) to my watchlist
(20min delay)
|
|||||
Last
10.0¢ |
Change
0.000(0.00%) |
Mkt cap ! $14.62M |
Open | High | Low | Value | Volume |
10.0¢ | 10.0¢ | 10.0¢ | $8.784K | 87.84K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
2 | 127000 | 9.5¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
10.0¢ | 5155 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
2 | 127000 | 0.095 |
1 | 6500 | 0.093 |
1 | 111849 | 0.084 |
1 | 200000 | 0.065 |
0 | 0 | 0.000 |
Price($) | Vol. | No. |
---|---|---|
0.100 | 5155 | 1 |
0.105 | 82660 | 2 |
0.110 | 77000 | 2 |
0.115 | 8000 | 1 |
0.120 | 7826 | 1 |
Last trade - 11.12am 17/10/2024 (20 minute delay) ? |
Featured News
RCL (ASX) Chart |
The Watchlist
LPM
LITHIUM PLUS MINERALS LTD.
Simon Kidston, Non Executive Director
Simon Kidston
Non Executive Director
SPONSORED BY The Market Online