@ozbucheron in addition to @tbulm ’s comments above the underground workings aren’t a 2m drillhole - they are a 2-3m void!
Reasons for drilling these short core holes would include:
- Determine the nature of the FW/HW contacts - Sharp vs Diffuse.
- Determine the dip/plunge orientation of the FW/HW contacts.
- Determining thickness and therefore volumes of remnant mineralisation.
- Determine whether they are looking at 1 or more mineralised vein systems (there appears to be zones highlighted by the grab/channel samples that have high Cu/Ag/Sb vs zones with high Co/Ni mineralisation).
- The information gathered from these drill holes may be used to plan strike extension drilling as well as down-dip/plunge targeting of the mineralisation.
- Also as @tbulm alluded to mineralised samples could be used for metallurgical testwork which can aid the design of any future processing plant.
AIMHO-DYOR-GLTAH!
- Forums
- ASX - By Stock
- ASO
- Ann: Quarterly Activities Report
Ann: Quarterly Activities Report, page-19
-
- There are more pages in this discussion • 3 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add ASO (ASX) to my watchlist
(20min delay)
|
|||||
Last
1.3¢ |
Change
0.000(0.00%) |
Mkt cap ! $16.83M |
Open | High | Low | Value | Volume |
1.3¢ | 1.4¢ | 1.3¢ | $3.682K | 274.2K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 112590 | 1.3¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
1.4¢ | 1060997 | 4 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 112590 | 0.013 |
2 | 1175000 | 0.012 |
6 | 2058737 | 0.011 |
7 | 3300000 | 0.010 |
8 | 1749993 | 0.009 |
Price($) | Vol. | No. |
---|---|---|
0.014 | 1060997 | 4 |
0.015 | 1793690 | 8 |
0.016 | 1649788 | 3 |
0.017 | 442238 | 2 |
0.018 | 281235 | 2 |
Last trade - 16.10pm 17/09/2024 (20 minute delay) ? |
Featured News
ASO (ASX) Chart |