The "SHM For Loads" sensors do what they say - measure loads, including torque loads. As such, they are unsuitable for crack detection.
"SHM for damage" seem to be way back down the learning and certification curve, just moving out of the lab to testing in military applications. "Available for layup thicknesses up to 0.75 inches" seems to indicate that the sensors are for composites [e.g. carbon fibre].
Other two are for ground inspections.
- Forums
- ASX - By Stock
- SMN
- Jentek Sensors
Jentek Sensors, page-4
-
-
- There are more pages in this discussion • 1 more message in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add SMN (ASX) to my watchlist
(20min delay)
|
|||||
Last
57.5¢ |
Change
0.025(4.55%) |
Mkt cap ! $78.98M |
Open | High | Low | Value | Volume |
57.5¢ | 57.5¢ | 57.5¢ | $1.438K | 2.5K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 4518 | 55.0¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
61.0¢ | 1000 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 4518 | 0.550 |
1 | 12500 | 0.540 |
1 | 4644 | 0.535 |
2 | 12500 | 0.530 |
1 | 10000 | 0.525 |
Price($) | Vol. | No. |
---|---|---|
0.610 | 1000 | 1 |
0.625 | 9109 | 1 |
0.630 | 6837 | 1 |
0.670 | 1500 | 1 |
0.690 | 6000 | 1 |
Last trade - 15.52pm 07/10/2024 (20 minute delay) ? |
Featured News
SMN (ASX) Chart |