progress, page-15

SS

They'll log the LG SST & collect gas/fluid samples using the MDT tool. However first indicator of gas bearing sands should b the peaks on the Chromatograph/Gas detector.

Once the payzone's drilled they'll analyse the collected fluids for a breakdown.

Post logging I anticipate results on the net sand thkness. This will prove that GIP is actually there & can b recovered at 20 or 50% recovery factor. We already know the porosity sits in the 18-23% range in Persues's LG SST so that shouldnt vary.

So, 18TCF GIP coupled with sand thkess & RF will give them the final recoverable volume, which is the purpose behind this well. "Prove that gas is there & then develop it' or negotiate with the biggies IMO.

Hope drilling goes as planned & most importantly safely. 18TCF is a lot of gas in place, so critical to chk the BOP's to avoid any blow-outs.

cheers