Ann: Buffalo-10 Drilling Update, page-56

The top is mapped at around 3250m measured depth & is around 50-60m odd thick, so wont b until they get to that depth (post setting the 9" casing etc etc). The net to gross, porosity, perm is known from the offset wells. The attic is at Crestal due to displacement from local faulting as seen & mapped from the Seismic's.

They'll know in realtime what they r drilling thro' from the MWD/LWD tool assembly & ditch gas thro' the GasChrom. However, comprehensive WL Logging & fluid sampling etc is done on reaching TD. So around 5-7 days for running logs etc. The well is in a known province not far from their offset well Buffalo-5, so Pressure & Fluid data acquisition holds the key. Oil quality was very light around 53 API. Will monitor the V107 rig when there's any movement in Oct after the 2 Skua remedial wells. Jadestone should release some info in their Sept qtrly.

For now, it's probably worthwhile for all to catch up on Buffalo redevelopment Full RISC reporton Advance's website.