SPQ Chart, page-588

Trainwrex, hole 5. This hole was extended as mineral goes under hole 1 and hole 4.

In the mineral interpretation pre drill, it was thought to not, ie the plunge channel not as wide, down the east side of the intrusion.

Its not drilling for a target, just following mineral. Looks like the down plunge area will be 200m wide atleast.

Considerable. They mention breccia like, often we have breccia pipes that can go down a very long way.

To get depth would require more holes westerly at same angle as hole 5, or better, same as hole 4, with 5 deg less was angle.

I think they will not go to deep, but follow the mineral over the intrusion West.

These deposits come from deep and flow up. What they have is most likely epithermal new porphyry mineral.

If so, the best is yet to come more west.

Hole 4 was 632m, considerable and the mineral found in that hole has a source to it. Also that hole had zones plus 1% cu.

So we have some nice layers. This hole should get the same or better. Better because it maybe identify a breccia pipe.