Hi Goldhunter,
Some of the targets may certainly be shallow enough to hit with RC. This is always a open question dependent of water ingress and how much air and pressure the driller can generate across the rig/auxiliary compressor/booster. Standard mode of operation on a project like this is to get a dual purpose rig, do all the RC and then spend a day switching over from air to water swivels and subs. Some of the RC drilling may be targeting conductors directly and others may be pre-collars for the diamond.
I went back and had a look at the previous drilling at Ineuendy and Irrida. Irida conductors were modeled at 3000S, Inouendy at 2000S. All conductors were massive and disseminated sulphides consisting of Pyrrhotite and very minor selvedges of Chalcopyrite and Penthlandite.
30000S at Dingo could certainly be a big fat thicker package of the same or it could have the Ni-Cu and PGE we are after. Very keen.
GLTA
CC
- Forums
- ASX - By Stock
- DM1
- Ann: Drilling at Dingo Pass
Ann: Drilling at Dingo Pass, page-39
-
-
- There are more pages in this discussion • 28 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add DM1 (ASX) to my watchlist
(20min delay)
|
|||||
Last
2.4¢ |
Change
0.000(0.00%) |
Mkt cap ! $6.370M |
Open | High | Low | Value | Volume |
2.4¢ | 2.4¢ | 2.4¢ | $504 | 21K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
2 | 1002272 | 2.2¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
2.4¢ | 423662 | 2 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
2 | 1002272 | 0.022 |
1 | 200000 | 0.020 |
1 | 500000 | 0.018 |
1 | 600000 | 0.017 |
1 | 100000 | 0.015 |
Price($) | Vol. | No. |
---|---|---|
0.024 | 423662 | 2 |
0.025 | 467864 | 1 |
0.028 | 260357 | 2 |
0.029 | 877294 | 2 |
0.030 | 394669 | 1 |
Last trade - 14.41pm 27/09/2024 (20 minute delay) ? |
Featured News
DM1 (ASX) Chart |