WR1 General Discussion, page-13693

Not quite; he used words to the effect of

"you can work out some of the deposit tonnage by using some figures that has been provided for the main zone, we know its 750 long, it has a true width of 40 or 50m and has been traced to at least 200m."

So for main zone using this comment its, 750x 50x 200 x 2.7 = 20mt

Problems is; we know its deeper than 200m, past announcement indicated its now 850m long, up from 750, then 820, now 850. We know its another 1.3klm to hole 45 that identified on the gravity survey and along the greenstone belt.

Add, the footwall zone, that is possible hits the surface from 400m down depth, and its hard to quantify;

If you calculate more knowns that unknowns you have this

850x 50 x 200 x 2.7 = 23mt (1.3klm to hole 45? = 1300x 200x 50 x 2.7 = 35mt) Total 57mt

Footwall

850 x 35m (Varying width) x 400m (possible depth) x 2.7 = 32mt

Whats probable atm

Current main and Current footwall =55mt
+ Main extension 35mt + 88mt

Does the footwall continue to hole 45?

What happens if both main zone and footwall head west to the old MTC holes?

100mt very likely.