Ann: Development Progress - Lindi Jumbo Mine, page-5330

Hi Sparecash,

I am sure you are just taking the mickey out of investors, no one can be this silly.

I will explain the below table as I would explain it to a small child. please let me know if you still don't understand at the end.

The specification is for +80 mesh graphite, the guarantee is about the amount of graphite that will be above +80mesh, I have highlighted a green box of the graphite that is above +80 mesh in size
The +80 mesh contains +50 mesh 18.6%,+60 Mesh 23.5% and +80 Mesh 43.6% combined a total of + 80 mesh is 85.7% which is in line with the greater than 80% guarantee / Ret above the +80 mesh requirement,

The red box is all the graphite that is below +80, containing +100 10%, +150 2.2%, +200 0.7% +325 0.6% and -325 0.8%
Combined all of the contained flakes that are smaller than +80 mesh is 14.3% Which is below the equal or less than 20% guarantee/pass below +80mesh requirement

Your claim that SYR produces 20% fines (-325 mesh or 44 microns) is based on your incorrect reading of the table as only 0.8% is this flake size, it shows that you have little understanding and have tried to inflate the fines -325 mesh size by 2000% to try to make this other company look inferior, yet the issues isn't their specification the problem is the person reading the table.







Are you being this desperate about your investment that you need to provide false and misleading information about other companies to try to make your own investment look better? Sadly WKT is yet to provide a specification based on their commercial production for investors to review, no doubt you will overinflate WKT's results in an attempt to make them look better than they are.