Hi Nevman
I have used an average depth of 350m(3,500m of drilling with 10 holes) The suface area i achieved by using the scale at the bottom of the drill map, drill hole 4 in the north to drill hole 9 in the south is around 500m, drill hole 1 on the east is between 300 and 400m to the west side of high grade surface area and has a drill hole located number 5 or 6. Yes the mineralisation in the south is much deeper aproaching 500m but the north around 205m but i just averaged out the drill holes to around 350m depth, there is one hole from Mining Italia further to west outside of the high grade surface footprint that returned a very wide gold intersection(+100m)this hole is on the yellow area of the footprint giving the east west widh that extra little distance.
I dont think any of the holes exceeded 500m as the rig ran out of power around the 480m depth on holes 3,9 and 10 and these are still open at depth as far as mineralisation.
cheers
- Forums
- ASX - By Stock
- ANL
- original drill program
original drill program, page-16
-
- There are more pages in this discussion • 82 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add ANL (ASX) to my watchlist
|
|||||
Last
0.1¢ |
Change
0.000(0.00%) |
Mkt cap ! $25.74M |
Open | High | Low | Value | Volume |
0.0¢ | 0.0¢ | 0.0¢ | $0 | 0 |
Featured News
ANL (ASX) Chart |
Day chart unavailable