1% will do it for me....
"UPDATE ON PROGRESS IN USA TOWARDS ESTABLISHING
COMMERCIAL PRODUCTION AND MARKETING OF EDENCRETETM
Perth-based Eden Energy Limited (ASX: EDE) is pleased to announce further progress in the USA
since the Company’s ASX announcement on 25 May 2015, towards establishing large scale
commercial production of EdenCreteTM, the Company’s carbon-strengthened concrete additive.
Ongoing and Proposed Trials
• Colorado based Metro Mix, the first company to trial EdenCreteTM in the US, has undertaken
a third commercial project in Colorado (see Figures 1 and 2), again confirming the high quality
and workability of the EdenCreteTM concrete. A fourth project is expected soon.
Figure 1
Figure2
2
• Once four commercial projects have been completed and documented, Eden can then apply to
the Department of Transport (DOT) in the State of Colorado or any other US States where
their DOT may be interested, for a field trial to be conducted by the relevant DOT, which is
the prerequisite to being added to the pre-approved product list of DOT. Of relevance, it may
be possible for the approval by one State’s DOT to be easily adopted by the DOT in another
State.
• Initial discussions with the DOT in the State of Georgia have also taken place and resulted in
the preliminary steps being initiated for field trials of EdenCreteTM to be undertaken in
conjunction with the Georgia DOT. These trials are planned to take place within the next two
months. In addition to many concrete highways and other concrete infrastructure, Georgia has
in excess of 15,000 concrete bridges (ranging from small to large) and a recent audit
indicated that over 4,000 were not suitable for repair and need to be replaced over the next 20
years, at an estimated annual cost of in excess of $300 million per year.
• The second US concrete company (a large national company) to trial EdenCreteTM in
Colorado has been satisfied with the results and has indicated possible interest in moving to
commercial projects and discussions are anticipated in the short to medium term.
• A third US company that recently commenced trials of EdenCreteTM in Colorado has also
achieved a significant increase in early compressive strength (an 18% increase in
compressive strength after one day and a 24% increase after seven days). Consequentially, all
four companies that have now trialled EdenCreteTM (three in the US and one in Australia)
have all experienced encouraging increases of compressive and/or flexural or tensile strength.
• Two further concrete companies, each of which operates in a separate State of the US, have
also expressed interest in trialling EdenCreteTM.
Ongoing US Discussions in relation to the Establishment of Large Scale
Commercial Production Capacity of EdenCreteTM
• Ongoing discussions with various relevant parties related to both the possible location and
financing in the US of Eden’s first proposed large scale EdenCreteTM production facility have
continued and a reasonably small number of possible alternatives have been shortlisted, with
a final decision on the chosen location and method of financing still expected within the next
two-three months.
Proposed US Production Scale-Up Timetable
• A specialist engineering group has been engaged to undertake the preliminary design work on
a reactor capable of producing a targeted 250 tonnes of carbon nanotubes (CNT) per annum.
The anticipated time to design and build this reactor is likely to be between 15-18 months.
• Initial planning to increase short term CNT production capacity at Eden Innovation’s
Colorado based facility is also underway, with a view to expanding this capacity as required
to try and satisfy the targeted increase in demand for EdenCreteTM until the large scale facility
comes on line.
• Subject to any unforeseen delays and a satisfactory conclusion to the ongoing discussions on
site selection and financing, Eden has formulated a targeted 21-24 months’ timetable for
completion of:
o the leasing of an existing factory or the construction of a new factory, and
o completion of the design, building and commissioning of the equipment required for
the first stage capable of producing up to 250 tonnes of carbon nanotubes (CNT) per
annum, which should produce enough EdenCrete TM to supply up to 1% of the total
annual US concrete market.
3
• The proposed factory is intended to have the capacity to accommodate expanded production
of up to a total of 1000 tonnes per annum of CNT, and subject to sufficient future market
demand in the US or elsewhere, this expansion is presently targeted to occur progressively
over the next 4 years.
New US Subsidiary Company Established
• Eden has incorporated a new, wholly owned US subsidiary named EdenCrete Industries Inc.
that will be used as the vehicle to undertake the production and marketing of EdenCrete TM in
the US.
Summary
Although no agreement with any third parties related to the proposed scale up to a large
commercial production capacity (other than as mentioned above) has yet been reached, the
overall progress is encouraging and the directors remain hopeful of a successful outcome in this
complex process.
- Forums
- ASX - By Stock
- EDE
- Ann: EdenCrete Project - US Progress Update
Ann: EdenCrete Project - US Progress Update, page-2
-
- There are more pages in this discussion • 34 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add EDE (ASX) to my watchlist
(20min delay)
|
|||||
Last
0.2¢ |
Change
0.000(0.00%) |
Mkt cap ! $8.216M |
Open | High | Low | Value | Volume |
0.0¢ | 0.0¢ | 0.0¢ | $0 | 0 |
Featured News
EDE (ASX) Chart |
Day chart unavailable