88E 0.00% 0.2¢ 88 energy limited

ASX Today, page-1505

  1. 2,755 Posts.
    lightbulb Created with Sketch. 779
    FYI, a rather simple explanation of a Cup and Handle Pattern.
    Hope this helps.

    The Cup & Handle Pattern
    The Cup & Handle is the corrective action after a powerful stock advance. Generally a stock will have a powerful move of some 2 to 4 months, then go through a market correction. The stock will sell off into the correction in a downward fashion for maybe 20 to 35 percent off the old high point. The time factor is generally anywhere from 8 to 12 weeks depending on the overall market condition.
    As the stock comes up to test the old highs, the stock will incur selling pressure by the people who bought at or near the old high. This selling pressure will make the stock price drift in a sideways fashion with a bias to the downside for about 4 days to 3 weeks.
    The handle is generally about 5% below the old high point. A handle that is any lower is generally a defective stock and contains higher risk for failure.
    The time to buy the stock, is as it emerges into new highs at the top of the handle and not the old high point set some 8 to 12 weeks ago.
    I have found some of the biggest stock market winners have this very powerful formation. It is one of the best and most reliable formations to look for. However, it is important to note that the best stocks with this formation are found at the beginning of a market move after a good market correction, and not during, or at the end of a major market advance.
    HERE IS A SAMPLE CHART WITH A CUP AND HANDLE FORMATION
 
watchlist Created with Sketch. Add 88E (ASX) to my watchlist
(20min delay)
Last
0.2¢
Change
0.000(0.00%)
Mkt cap ! $57.86M
Open High Low Value Volume
0.3¢ 0.3¢ 0.2¢ $31.76K 15.34M

Buyers (Bids)

No. Vol. Price($)
17 14573501 0.2¢
 

Sellers (Offers)

Price($) Vol. No.
0.3¢ 473268494 221
View Market Depth
Last trade - 16.10pm 30/08/2024 (20 minute delay) ?
88E (ASX) Chart
arrow-down-2 Created with Sketch. arrow-down-2 Created with Sketch.