A subsea BOP is fitted with a Flex joint above, this allows the rig to move and not stress the riser connection above the BOP.
When you run tooling in the well particularly large OD tools, you jump the ROV to check the bullseyes on the flex joint and ensure the angle is less than 1 degree.
Same when you have issues releasing tools or are encountering high overpulls / hook loads.
You may need to move the rig to ensure the angle of the flex joint is as low as possible.
- Forums
- ASX - By Stock
- FAR
- Another week ... hard to take!
Another week ... hard to take!, page-33
-
- There are more pages in this discussion • 95 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add FAR (ASX) to my watchlist
(20min delay)
|
|||||
Last
46.5¢ |
Change
0.010(2.20%) |
Mkt cap ! $42.97M |
Open | High | Low | Value | Volume |
45.5¢ | 47.0¢ | 45.5¢ | $116.3K | 247.8K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 22574 | 46.5¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
48.0¢ | 10000 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 22574 | 0.465 |
2 | 13100 | 0.455 |
1 | 1822 | 0.450 |
1 | 50000 | 0.425 |
1 | 33894 | 0.410 |
Price($) | Vol. | No. |
---|---|---|
0.480 | 10000 | 1 |
0.485 | 10000 | 1 |
0.490 | 30000 | 1 |
0.495 | 50000 | 1 |
0.500 | 110000 | 2 |
Last trade - 15.00pm 17/09/2024 (20 minute delay) ? |
Featured News
FAR (ASX) Chart |