G'Day all-Their we go-Remember THERE IS NO DILUTION Concerns-when you recover low cost to Re-process tailings,
as previously posted-their will be significantly higher area's in the dry stacked tailings than the reported 9 g p/t tailings.
Below extracts from postPost #: 33845316-for those intersted "Important"-Quote- This same batch was processed in a much larger quantity of 100 tonnes through the gravity plant on December 22, and "ACHIEVED A GRADE OF ONLY 2 G P/T". Quote continued Owing to the large differences in grade we have decided to re-process several bulk samples of previously processed material (tailings)
through the trial hammer mill which gives a much finer grind than the current comminution circuit to ascertain the potential gold content. ASX-Release Quote -Importantly the MSM batch , was a blend of both stope and development ore results & focus on the MSM sample results that returned 26.64 g p/t.
So we can see they did re sample from the 100 tonne batch that the gravity plant processed & ONLY RECOVERED 2 G P/T from, yet this same[B] MSM - 100 t batch that was resampled & processed through the hammer mill-[/B] RETURNING A GRADE OF 26.64G P/T.
So the differential between the 2 grams per tonne recovered by the gravity plant & the same batch resampled with the small hammer mill returned Gold Grams at 26.64 g p/t.
So the gravity plant only recovered 2g p/t & the resampled recovery was 26.64 g p/t so at realistically 85% recovery when resampling was done -means the gravity plant was being supplied (mill feed grade ) 31 grams per tonne & only recovered 2 grams per tonne ?
NOTE: From this 100t batch the gravity plant processed recovering was a Dismal 6.5 % of gold & 93.5% of gold was GOING TO TAILINGS
And now we get further conformation QUOTE-OGX'S M.D-J.G.- from the M.C 121-London- conformation of tailings grades between 9g p/t-84 g p/t & recent TAILINGS VOLUME -thought to contain to be 38,000 t.
All coming together -recent revelations further confirm what was already quiet obvious. gltah-salt