Hot Curry, page-26

@slipperymack Plan 1 of this report and the relevant cross sections is a good place to start:

https://hotcopper.com.au/threads/hot-curry.5515010/page-12?post_id=46062046

They only seem to have down plunge mineralisation intersected on two sections and they around 60-70m apart, holes TR17RC010 to 014 didn't hit anything significant as far as I can see from announcements, remember that AMG can only drill on ML2549 (granted mining lease), they cant go off drilling along strike in someone-else's exploration tenement.

As I said before - they AMG needed to stop stuffing around back in 2018 and get the drill rig over on the other side of the Quartz Hematite Breccia zone and drill towards the northeast to get something close to true widths and drill the mineralisation zone more orthogonally, they should have done this after the first few holes because that ASX release shows visual copper mineralisation for 153m down plunge, and they had a portable hand held XRF to measure the Cu content of the RC chips, they had visual copper sulphides in RC chips, so after the first few holes were completed, they should have realized they were drilling down dip/down plunge (you don't need x-ray vision for that - you just need to see the geology and the XRF results) and turned the rig around and drilled the other way, like any normal exploration company would have done, rather than drilling around 14 holes in the wrong orientation. Its exploration - we get that a hole or two will be designed the wrong way or hit unexpected things, its how people react to it that shows the thinking and rationale behind the drilling.

It takes 5 mins on the Satellite phone to confirm with head geologist that "Yep - at Trump we strongly suspect are drilling down-dip or down-plunge, shall I get the drillers to move the rig around the other side, and drill a confimatory hole the other way to confirm this, after we finish this hole we are on?"

That's how normal exploration works.