Not quite as simple BS.
CMOS (and TTL although TTL have different voltages) signals are also voltage signals.
You correctly state that digital is referred as a 0 or a 1. However the 0 and the 1 are voltage levels.
Pretty well everything is voltage levels in electronics, snd it’s just how they are used.
For a CMOS gate operating at a power supply voltage of 5 volts (it can be 10 volts, or other supply voltages), the acceptable input signal voltages range from 0 volts to 1.5 volts for a “low” logic state(a zero), and 3.5 volts to 5 volts for a “high” logic state(a one). You are correct that digital circuitry is not as sensitive to noise, and is due to the value of the threshold voltages.
You will notice that there is cushion of 2 Volts between low and high (0 and 1) values. This is sometimes referred to as noise margin.
This is a basic explanation as there is more to this theory and also there are different CMOS systems that operate from different supply voltages, but the concept is similar.
- Forums
- ASX - By Stock
- BRN
- 2021 BRN Discussion
2021 BRN Discussion, page-7378
-
- There are more pages in this discussion • 26,203 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add BRN (ASX) to my watchlist
|
|||||
Last
19.0¢ |
Change
0.015(8.57%) |
Mkt cap ! $372.2M |
Open | High | Low | Value | Volume |
17.5¢ | 19.0¢ | 17.5¢ | $678.9K | 3.699M |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
11 | 370054 | 18.5¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
19.0¢ | 826175 | 22 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
11 | 370054 | 0.185 |
20 | 850972 | 0.180 |
53 | 1684155 | 0.175 |
89 | 3001400 | 0.170 |
50 | 1387326 | 0.165 |
Price($) | Vol. | No. |
---|---|---|
0.190 | 826175 | 22 |
0.195 | 1069448 | 17 |
0.200 | 961314 | 40 |
0.205 | 862425 | 11 |
0.210 | 638898 | 16 |
Last trade - 16.10pm 21/08/2024 (20 minute delay) ? |
Featured News
BRN (ASX) Chart |