Glovski,
This is what I use for scans by Dema and RSI you can alter the RSI settings for you own set up...
In the Filter box cut and paste this in then alter what you want..
Fml( "close - ref close")> ATR(13) AND C>Ref(C,-1) AND Fml( "range34") < 440 AND V>500000
AND Fml( "risk indicator")<0.15 AND Dema(RSI(14),3) > Dema(RSI(55),7)
AND Dema(RSI(55),7)>56 AND Dema(RSI(14),3) > Dema(RSI(50),7)
AND Dema(RSI(55),7)<61
Then in the A box put in this
Fml( "Dema filter")
Then in the B box put in this
Fml( "sharpe150_c")
Then in the D box put in this
C
Then in the E box put in this
ROC(C,30,%)
Then in the F box put in this
ATR(100)/Mov(C,100,E)
That should do the trick..
MACD I use Mad Max's Zero Lag Macd he's posted it on HC before so I'm sure he wont mind..
Macd Zero Lag:
EMA1:= Mov(CLOSE,13,E);
EMA2:= Mov(EMA1,13,E);
Difference:= EMA1 - EMA2;
ZeroLagEMA13:= EMA1 + Difference;
EMA1:= Mov(CLOSE,21,E);
EMA2:= Mov(EMA1,21,E);
Difference:= EMA1 - EMA2;
ZeroLagEMA21:= EMA1 + Difference;
ZeroLagMACD:=ZeroLagEMA13 - ZeroLagEMA21;
ZeroLagMACD
Macd Zero Lag Trigger
EMA1:= Mov(CLOSE,13,E);
EMA2:= Mov(EMA1,13,E);
Difference:= EMA1 - EMA2;
ZeroLagEMA13:= EMA1 + Difference;
EMA1:= Mov(CLOSE,21,E);
EMA2:= Mov(EMA1,21,E);
Difference:= EMA1 - EMA2;
ZeroLagEMA21:= EMA1 + Difference;
ZeroLagMACD:=ZeroLagEMA13 - ZeroLagEMA21;
EMA1:= Mov(ZeroLagMACD,8,E);
EMA2:= Mov(EMA1,8,E);
Difference:= EMA1 - EMA2;
ZeroLagTRIG:= EMA1 + Difference;
ZeroLagTRIG
Cheers Pete
- Forums
- ASX - General
- weekend charting 14th-16th may
weekend charting 14th-16th may, page-90
-
- There are more pages in this discussion • 23 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)