The biggest component of a lithium-ion battery used in an electric vehicle (EV) is typically the cathode. The cathode is typically made of metal oxides that contain lithium, such as lithium nickel manganese cobalt oxide (NMC) or lithium iron phosphate (LFP), and it can account for up to 40% of the total weight of the battery.
The cathode is responsible for storing and releasing lithium ions during charge and discharge cycles, which is what produces the electrical energy that powers the EV's motor. Because the cathode is a critical component of the battery, it is often designed to be the most robust and long-lasting component of the battery.
While the anode, electrolyte, and separator are also important components of a lithium-ion battery, they typically account for a smaller percentage of the total weight of the battery compared to the cathode. The anode is typically made of graphite or other forms of carbon and accounts for around 5-10% of the total weight of the battery. The electrolyte and separator are both relatively small components that typically account for less than 1% of the total weight of the battery.
In addition to the cathode, anode, electrolyte, and separator, there are several other components that make up the rest of the weight of a lithium-ion battery used in an electric vehicle (EV):
- Housing: The battery pack is typically housed in a protective casing made of metal or plastic. The housing helps to protect the battery from damage and also provides structural support.
- Thermal management system: The battery pack may include a thermal management system to regulate the temperature of the battery cells. This can include cooling systems, such as liquid or air-cooling, or heating systems, such as electrical resistance heaters.
- Control electronics: The battery pack may also include a control system that manages the charging and discharging of the battery cells. This system may include sensors to monitor the battery's state of charge and health, as well as electronics to manage the flow of electrical energy in and out of the battery.
- Wiring and connectors: The battery cells are typically connected together in series and parallel configurations using wiring and connectors. These components help to distribute electrical energy evenly across the cells and allow the battery to deliver high levels of power.
- Safety features: Lithium-ion batteries for EVs may also include safety features such as fuses, circuit breakers, and other devices to prevent overcharging, over-discharging, and short circuits.
All of these components, in addition to the cathode, anode, electrolyte, and separator, contribute to the total weight of the battery. While the specific weight breakdown can vary depending on the battery design and application, the cathode and housing are typically the largest components in terms of weight.
- Forums
- ASX - By Stock
- IG6
- General Discussion IG6
General Discussion IG6, page-184
-
- There are more pages in this discussion • 156 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add IG6 (ASX) to my watchlist
|
|||||
Last
7.1¢ |
Change
0.006(9.23%) |
Mkt cap ! $13.74M |
Open | High | Low | Value | Volume |
7.1¢ | 7.1¢ | 7.1¢ | $311 | 4.386K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 25000 | 7.0¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
8.5¢ | 25575 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 25000 | 0.070 |
1 | 150000 | 0.065 |
1 | 214000 | 0.064 |
1 | 16377 | 0.061 |
5 | 171000 | 0.060 |
Price($) | Vol. | No. |
---|---|---|
0.085 | 25575 | 1 |
0.092 | 107500 | 1 |
0.095 | 1500 | 1 |
0.096 | 48955 | 1 |
0.110 | 71336 | 1 |
Last trade - 15.58pm 02/09/2024 (20 minute delay) ? |
Featured News
IG6 (ASX) Chart |