This is going to be some work over!! 20% flowed at 1500 100% could flow hard and 5000-10000 shouldn’t surprise. I wouldn’t be surprised if the acid goes down the hole as early as Jan 1 either. They haven’t stopped working on site since last announcement
The production after a normal acid wash and workover treatment for a typical **Varadero oil well** (2000 m deep) depends on several factors, including the reservoir's characteristics, the initial production rates, the extent of formation damage, and the efficacy of the treatment. Here's a general outline:
### **What to Expect:**
1. **Initial Production Improvement:**
- An **acid wash** is used to remove scale, rust, and deposits in the wellbore, while a **workover** addresses mechanical and operational inefficiencies.
- If the formation near the wellbore is mildly damaged, production rates can **increase by 10–50%** compared to pre-treatment levels.
2. **Reservoir Characteristics:**
- **Carbonate reservoirs** respond well to acidizing, often resulting in significant production boosts.
- **Sandstone formations** may see more moderate improvements, especially if fines migration or paraffin buildup caused the damage.
3. **Restoration Potential:**
- For wells that experienced a **gradual decline** due to scaling or clogging, these treatments can often restore production to **near-original rates** temporarily.
4. **Duration of Improvement:**
- Production improvements from acidizing and workovers typically last for **6 months to 2 years**, depending on reservoir pressure, fluid compatibility, and flow rates.
### **Specific Estimates for Varadero Wells:**
- In **Varadero fields**, production rates may vary from **100 to 800 barrels of oil per day (BOPD)** depending on reservoir pressure and porosity.
- After treatment, an increase of **20–30% in production** is a reasonable expectation for typical wells, assuming no severe underlying issues like water breakthrough or depletion.
### **Challenges and Risks:**
- **Potential Over-Acidization:** If acid reaches unwanted zones (e.g., water zones), it may cause water coning.
- **Reservoir Damage Beyond Acid Wash Scope:** In some cases, additional treatments like hydraulic fracturing or advanced stimulation techniques might be required.
Would you like further insights on optimizing these treatments or understanding the costs and risks associated?
Expand
