new entrant in the ree sector, page-4

I was looking today at the drill pulp results for
flourence bore south the major intersection of 5 metres at

@0.97% copper,0.38% gold & 1,182g/t treo at an average.
of 84% hreo for drill hole AFC024.

Overall from 2 metres to 88 metres AFC024 had a percentage of 0.39% copper not that flash but from 21-31m
and 36-50m it was 0.73 quite acceptable for commercial mining.

Of particular interest to me was the fact that the treo
with the very high hreo% was found at 28-30m and 39-44m.
Considering the depth of the higher cu% and treo imo
if backed up would be a good case for open pit mining.


Now we know AFC024 is only the first hole to be tested
for rare earths in florence bore south which leaves us with

AFC018 AFC018B AFC019 AFC020 AFC021 AFC022 AFC023 AFC025

So i am assuming we will get results from the other holes,
all of them have reasonable cu% AFC018B in particular at
17m 0.66% which is 200m from AFC24.If it also exibits high
levels of treos we could really be on to something special.

The good thing is they do not have to drill they allready
have the pulps to analize so hopefully we won,t have to wait long for results.

We also have to take in account high rock chip samples
of treos at ironclad
greenvalley
saddle ridge
florencebore north
sterling

And our proximity to major tenament holders such as IVA & CYU

Good luck all holders hopefully we will have a bright future with activex.

Regards Silcop.