I am in the metallurgical plant building business. To dry out a blast furnace or Corex plant it takes approx. 3 weeks. After such time you would then start feeding a plant.
Heating from 0 to 100 °C can go very fast, but afterwards you typically have a temperature gradient of 4-5 °C/h and after 200 °C of 2-3 °C/h. Everything depends of course on the type of refractory used.
As in a rotary kiln the temperatures required are lower (as mentioned above 650 °C and not e.g. at Corex 1000 °C) I would guess heating of the plant will take approx. 11 to 14 days.
br
good luck to all
1st feed to kiln , page-28
-
- There are more pages in this discussion • 47 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Add LYC (ASX) to my watchlist
 (20min delay)
|
|||||
|
Last
$7.89 |
Change
-0.130(1.62%) |
Mkt cap ! $7.374B | |||
| Open | High | Low | Value | Volume |
| $7.97 | $8.02 | $7.86 | $27.21M | 3.442M |
Buyers (Bids)
| No. | Vol. | Price($) |
|---|---|---|
| 3 | 12329 | $7.86 |
Sellers (Offers)
| Price($) | Vol. | No. |
|---|---|---|
| $7.90 | 8744 | 2 |
View Market Depth
| Last trade - 16.10pm 01/10/2024 (20 minute delay) ? |
| LYC (ASX) Chart |