Loving the enthusiasm surrounding Sniffphone and our partnership with Nanose is an interesting and complex one. Very hard to get any concrete information.
As far as I can tell the project is complete with a summary below.
https://www.fabiodisconzi.com/open-h2020/projects/194138/results.html
Work performed\"The major activities of the SNIFFPHONE project revolve around the detailed planning, design and production of the first prototype; it\'s testing in multiple aspects, conclusion drawing and implementation in the design of the second prototype. Finally the fabrication and initial characterization of the second prototype have been carried out.Briefly:• Sensors array fabrication - A large number of synthesis and deposition parameters were manipulated and optimized giving rise to the optimal conditions, for each chemistry. Exposure to various VOC\'s yielded valuable insights on the variability of sensor-to-sensor as well as on the sensor(s) drift and aging parameters. The array was also exposed to GC markers, and a Matlab code was generated in order to facilitate the selection and calibration of the sensor array.• NV- Humidity sensors were adjusted, their response time was reduced via addition of a heating body in the second prototype. The fitting of three humidity sensors demonstrated to efficiently detect the beginning of the breath, were complimented by the addition of pressure and proximity sensors as well. This ensured repeatability in the measurement of the exhaled breath and was implemented in the second prototype.• MFCS manufactured different \"\"microfluidic chips\"\" and \"\"breath inlets\"\" which were tested by UIBK. The optimal exhalation distance and mode were investigated and a breath collection protocol was devised and implemented in the clinical trials. in addition, an improved microfluidic chip was manufactured and fitted in the second prototype.• Cellix manufactured a pump for optimal performance. The chamber size was enlarged and two valves were added. In addition, Cellix has manufactured the case and assembled the prototype and contributed to the communication protocol in both prototypes.• JLM manufactured the PCB boards, firmware and software to communicate and activate all functional parts of both prototypes.• Breath samples were analyzed by VTT according to statistical methods (LDA and DSI). VTT has also provided a safe ICT platform for data transfer and analysis which would maintain the privacy of the users. In the forth year VTT also validated the accuracy of the classification model in the general public.• UOL collected heathy valentines and GC patents and generated data from there prototypes. This was accompanied by a study on confining factors generated on the same data base and a consecutive general public study was preformed.• UIBK and Technion launched a GC marker study on the samples gathered in the clinical trials. Data was analyzed by GC/MS, PTR/MS.• A market study and a literature review were conducted by SIEMENS and three user based questioners were launched. After the manufacturing of the prototype, Siemens and VTT, have repeated the user based survey and principles were extracted and implemented in the second prototype. This was done in an iterative fashion to insure the human driven design principle. In addition, an exploitation work shop was conducted.• Finally, a responsible research and innovation (RRI) study and a few filed exercises were performed.
Whilst I cannot find the completion date we all know that Akida was used in a clinical test in China.
https://brainchipinc.com/brainchip-nanose-successfully-detect-covid19/
What I find interesting and it's probably nothing is that when you try and search for the Technology Objective of the project the following appears.Page not found
The requested page "/technological-objectives" could not befound.
Maybe it is because they know that Akida is the best fit for the device or maybe not.
Unfortunately we will just have to wait and see.
In the meantime the research being done by everyone makes for interesting reading so keep up the great work.
- Forums
- ASX - By Stock
- 2022 BRN Discussion
Loving the enthusiasm surrounding Sniffphone and our partnership...
-
- There are more pages in this discussion • 4,547 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add BRN (ASX) to my watchlist
|
|||||
Last
20.0¢ |
Change
0.010(5.26%) |
Mkt cap ! $391.8M |
Open | High | Low | Value | Volume |
18.5¢ | 20.5¢ | 18.5¢ | $1.244M | 6.328M |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
6 | 128284 | 20.0¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
20.5¢ | 1139535 | 36 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
18 | 706518 | 0.200 |
12 | 568766 | 0.195 |
17 | 1134108 | 0.190 |
15 | 1513535 | 0.185 |
25 | 782861 | 0.180 |
Price($) | Vol. | No. |
---|---|---|
0.205 | 1251380 | 37 |
0.210 | 835598 | 21 |
0.215 | 412261 | 12 |
0.220 | 689586 | 17 |
0.225 | 97196 | 4 |
Last trade - 10.52am 22/08/2024 (20 minute delay) ? |
Featured News
BRN (ASX) Chart |