~250 b/d ? heavy-crude ... door to ~0.010 maybe wide-open ... or, page-200

... so may the acid-job have worked ? [in the most basic way of posting]

... well-response ?
... pre acid-job - ~294 b/d.
... post acid-job - ~260b/d.

... which number is higher everyone ? anyone want a gold star ... have a guess ...

... gas-shows ?... water [F] ? ... flow to surface ?

... the well may not have even unloaded completion brine !! with maybe larger interval [perfs] & x2 acid-stims?

... looks to be now open to production on maybe art-lift [PCP] ...

... A-3 drilled & completed [?] - no immediate stimulation operations ? what may that say.

'ASX ANNOUNCEMENT
15 April 2025
Block 9 Operations Update
LR 5.30 (j)PCP was run to lift the heavy brine and additional acid pumped. During
the pumping cleanup period, a total of 323 Barrels of completion fluid were
recovered. After cleanup, the well was tested on a fixed pump speed for 12
hours with an average rate of 488 BOPD and 7 BPD of completion brine.
Whilst running the MPLT survey, the well was flowed at an average rate of
260 BOPD through a 32/64” choke for a period of 21 hours. The survey
confirmed that a pump was required to lift the heavy completion brine.

LR 5.30 (k) The peak flow rate of 4,167 BPD of total fluid was recorded over a 15
minute period at a flowing tubing pressure of 56 PSI.
The average well test flow rate of 488 BOPD was recorded over 12 hours at
a flowing tubing pressure of 7 PSI.

LR 5.30 (m) During the cleanup flow, the presence of CO2 (a byproduct of the dissolution
of the Carbonate formation by the hydrochloric acid injected into the well)
was noted. No other non-hydrocarbon gasses were recorded during testing

The well was then shut in for 12 hours and
flow tested at a constant pump rate for 12 hours resulting in an average 488 BOPD plus 7 BPD
of water (completion brine) before shutting in and commencing rig-down of the service rig.
Remedial acid stimulations, such as these, are optimally conducted with the benefit of a coiled tubing unit (CTU),
both to direct acid and then to unload a well using gaseous nitrogen." [part-of]

... CTU ? ... to be clear, as of this post I've never contacted Melbana in any-way and if Melbana may have been receiving requests on CTU / N2 / MPD /ACID / ART-LIFT etc which I may have been posting about on these threads for ~18 months, and as some posters clearly may copy my posts on here, they may also try to look smart by hounding the company with their 'copy and paste' on CTU etc ...

... at the end of the day who cares as long as the market may like it ... I hope everyone makes bank on MAY.

... but on this A-2 work-over result, may the last ASX session be considered extraordinary ?!

... MAY - work-over complete - rig-released - have been performing extremely well operationally imo ...