4 metres at 1 million ppb (1000 g/t

4 METRES AT 1 MILLION PPB (1000 g/t
GOLD) - AIRCORE DRILL RESULT
FROM MT MONGER
RE-ASSAY RETURNS 4 METRES (COMPOSITE) AT 65 g/t
WHILE 1 METRE RE-SAMPLE RETURNS 3 METRES AT 78 g/t
INCLUDING 1 METRE AT 230 g/t GOLD
Integra Mining Limited (ASX:IGR) is pleased to report aircore drilling results from reconnaissance drilling in
the Mt Monger area (Figure 1). The target is high-grade gold associated with narrow veins similar to the
nearby Daisy Milano gold deposit. While the drill spacing of 80 metre lines and 40 metre spaced collars is
arguably too wide for this style of target, the weathering profile is approximately 20 metres thick and
provides opportunity for chemical dispersion of gold anomalism in proximity to the primary high-grade gold
vein style mineralisation (Figures 2 & 3). It would appear that drill hole IRRB059 has likely intercepted such
high-grade style gold mineralisation in the lower saprolite (less weathered) / fresh rock boundary.
Drill hole IRRB059 initially returned 6 metres at 660,000 ppb gold from 24 metres to bottom of hole
including 4 metres at 990,000 ppb gold from 24 metres (4 metre composite sample). Investors are
cautioned about the lack of implied precision and accuracy of a low-level gold analytical technique when
unexpectedly high gold values are encountered. Re-assay of the original samples by the higher-level fire
assay method returned 6 metres at 44.26 g/t gold including 4 metres at 65.40 g/t gold. Re-sample of
individual 1-metre samples returned 3 metres at 77.66 g/t gold including 1 metre at 229.59 g/t