Analysis of Drill samples

HI all IVR'ers

I am interested in anyone's interpretation of the following statements from IVR's ann 5-11-2020.(at the end of the report) Should there be high grade results I get the impression that they have to be sent to Canada ?

So my mind tells me there MAY be high grade results - maybe this is the delay......OR am I way off track.?

Thoughts please

Keep safe and looking forward to some more drill results !

Enjoy the Festive season and all the every best for the 2021 year ----------------- P--s of this Chinese Virus.

(I've been told one should not say that - Then The Asian Flu - Spanish Flu - Hong Kong Flu -no one from those areas --spat the dummy then -why now anyways this is off track. - sorry)

The Phantom GWW .

This is from the :-
APPENDIX 1: JORC Code, 2012 Edition – Table 1
Page 15

Quality of assay data and laboratory tests


• The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
• A certified and accredited global laboratory (ALS Laboratories)
(“ALS”) was used for all assays.
• Samples were analysed using methods MEMS61 with 25g prepared
sample total digest with perchloric, nitric, hydrofluoric and
hydrochloric acids and analysed by ICP-AES and ICP-MS for 48
elements including Ag and Pb.
• Over-range samples (>100ppm Ag, >1% Pb) were re-assayed using
ME-OG62, 4 acid digest with ICP-AES finish to 1500ppm Ag and 20%
Pb.
• Silver results greater than 1,500ppm are re assayed by ME-OG62H
using 4 acid digest with ICP-AES finish to 3,000ppm Ag.
• If samples remain over-range after this method, then GRA-21 is used
for Ag (0.1 - 99% Ag). ALS have recently closed their Australian
laboratory capable of undertaking the method of analysis and any
GRA21 analyses are required to be undertaken at their Vancouver,
Canada facility.