A simple estimate:
The larger right hand pit would be 200m+ wide, 100m deep, and I'll estimate 0.7-0.9g/t. Quarts is more like 600m long.
The smaller one I'll call <200m wide, 0.6g/t.
Not much stripping needed.
The cross section shows a barren bit in the middle, which seems to make a larger/combined pit unlikely. The right hand side of the cross section seems to be cut off, not showing what drilling exists over there.
This other cross-section appears to be open to the sides (confirmed below, except for 1 old drill hole).
This other cross-section is from down here (blue), and I drew lines how the 2 cross sections relate to each other (if B & R connect).
- Forums
- ASX - By Stock
- Ann: 2024 Diggers and Dealers Presentation
A simple estimate:The larger right hand pit would be 200m+ wide,...
-
-
- There are more pages in this discussion • 12 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add KCN (ASX) to my watchlist
(20min delay)
|
|||||
Last
$1.38 |
Change
0.020(1.48%) |
Mkt cap ! $354.4M |
Open | High | Low | Value | Volume |
$1.37 | $1.38 | $1.33 | $663.7K | 491.0K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
2 | 16404 | $1.36 |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
$1.38 | 6065 | 2 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
2 | 16404 | 1.355 |
2 | 8053 | 1.350 |
1 | 2553 | 1.345 |
1 | 1530 | 1.340 |
1 | 965 | 1.335 |
Price($) | Vol. | No. |
---|---|---|
1.375 | 6065 | 2 |
1.380 | 7553 | 2 |
1.385 | 2553 | 1 |
1.390 | 37500 | 2 |
1.400 | 7467 | 1 |
Last trade - 16.10pm 07/08/2024 (20 minute delay) ? |
Featured News
KCN (ASX) Chart |