Ann: FBR June 2018 Quarterly Report & Appendix 4C, page-4

This part is exciting. Beats most apartments/aluminium foil walls I hear.

Fastbrick Wall System Testing Over the past few months FBR has engaged Curtin University, Newcastle University, the Sydney CSIRO and a host of independent certifiers to conduct extensive testing on the current Hadrian optimised block prototype, adhesive and render that make up the Fastbrick Wall System. After conducting 7-day and 28-day compression strength tests, an independent certifier has determined that the current prototype Hadrian optimised blocks to be used in Factory Acceptance Testing (‘FAT’) and Build1 meet the requirements for use in up to 3-storey construction. Newcastle University also carried out bond wrench testing (designed to test the strength of the joins between the blocks) and prism compression testing on the Fastbrick Wall System, with both completed successfully. Preliminary flexural testing using the current prototype Hadrian optimised block indicated that the Fastbrick Wall System is capable of handling the worst cyclonic conditions in Australia. The Fastbrick Wall System has also completed fire rating testing at CSIRO Sydney with exceptional results. FBR intented to test the Fastbrick Wall System until destruction, but the below image shows the current prototype Fastbrick Wall System after over four hours of fire rating testing, at which point the test was concluded due to surpassing industry standard testing by a significant margin.