@addinvest, from your comment it sounds like you are in the industry
Can you please help to make me understand the following comment:
"The results of the tests show that the samples exceeded ASTM Standard A479/276 and F1384-16 in Ultimate Tensile Strength and Yield Strength and clearly demonstrates that the process meets or exceeds the relevant engineering standards that can be used for designing parts.
When fully developed, this dataset will allow engineers and designers to use values based on the ASTM** specification in their designs and ultimately print in an Aurora RMP-1 printer, subject to normal printing considerations."
Reading the ann it gives the impression that if the prints are meeting or exceeding the relevant engineering standards then this is enough for engineers to design parts/solutions but what kind of applications or industries would warrant higher standards to the above? ie. when would you need to know about the elongation at break limits?
- Forums
- ASX - By Stock
- A3D
- Ann: Major Step Towards MCP Process Validation
Ann: Major Step Towards MCP Process Validation, page-5
-
- There are more pages in this discussion • 45 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add A3D (ASX) to my watchlist
|
|||||
Last
6.3¢ |
Change
0.003(5.00%) |
Mkt cap ! $22.85M |
Open | High | Low | Value | Volume |
6.0¢ | 6.3¢ | 6.0¢ | $40.38K | 670.1K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 46388 | 6.1¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
6.3¢ | 109998 | 2 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 46388 | 0.061 |
2 | 183217 | 0.060 |
1 | 130000 | 0.059 |
1 | 100000 | 0.058 |
1 | 80600 | 0.056 |
Price($) | Vol. | No. |
---|---|---|
0.063 | 109998 | 2 |
0.064 | 175000 | 1 |
0.066 | 262413 | 2 |
0.068 | 50000 | 1 |
0.070 | 100563 | 1 |
Last trade - 16.10pm 06/09/2024 (20 minute delay) ? |
Featured News
A3D (ASX) Chart |