Ann: Multiple, Large Scale REE-Nb-Ti-P Carbonatites, page-211

Adding a long section to the above.
This does require some understanding of how drilling is projected and how far.
Both a vertical and inclined hole can plot as vertical lines here. An inclined hole hole drilled at right angles to the section plots vertically but if it is at an angle the geometry gets skewed. The depth of an inclined hole is also plots less than its true length - 3D visualisations are trying.

Some of the above is reflected in this section.

The top of fresh rock goes from zero (Fence 1)to near 100m below surface and back to zero (Fence 2). along this section. Expect variations to happen along/near the river channel.

Moving the section to the east approximately 80-100m would take it down the middle of the core zone 25-33 and perhaps east of the "barren" hole #25.

Hole 10's collar is well west of the section and not shown. The deeper part of the hole comes close to the window and is shown. Further drilling above the long intersection in 10 may show it extends to surface where anomalous rock chips were collected. Drill testing is planned in and adjacent to the Lyons River for 2023. Could be very interesting.

Is there something related to mineralisation at the "junction" between C3/4? Magnetic zone quite well defined.