1% is OK. Less than 1% is not great. The project already has...

1% is OK. Less than 1% is not great.

The project already has some good hits previously (see below from the website), so adding a few more good hits to mix isnt a bad thing to be sure.

I guess it all depends on if the meatier hits may be efficiently mined, or do they have to wade through too much low grade crap to get to them?



At Bygoo North Thomson has intersected multiple high-grade tin intersections in a quartz-topaz-cassiterite greisen including 11m at 1.0% Sn (BNRC10), 35m at 2.1% Sn (BNRC11), 11m at 1.4% Sn (BNRC13), 11m at 2.1% Sn (BNRC20), 29m at 1.0% Sn (BNRC33) and 19m at 1.0% Sn (BNRC40). The greisens appear to be steep to vertical; about 5-10m wide in true width; strike east-west; and the tin intersections appear to have continuity within the greisen.At Bygoo South Thomson has intersected a sulphide-rich quartz topaz greisen with high-grade tin intersections including 8m at 1.3% Sn (BNRC21), 20m at 0.9% Sn (BNRC31) and 7m at 1.3% Sn (BNRC35). The orientation and geometry of this greisen is not yet clear. 20km south of Bygoo Thomson has intersected more tin at one of the old workings in the Bald Hill tin field with a best result of 15m at 0.4% Sn from 19m depth in hole BHRC01.