Australia's largest stock trading and investment forum Australia's #1 stock forum

BUD

0.00%

0.6¢ buddy technologies ltd

If you understand what a clip on CT Sensor is you should be...

First 162 Last

Share
Profile

Follow
ithappens

269 Posts.

35

11/03/18

18:03

Post #: 31672666
Share

Originally posted by broosta ↑

‘Mr McLauchlan said the Ohm base unit is installed in proximity to meters or sub meters, and uses industry standard connectors to monitor electricity, solar, water, steam, gas and other natural and built environment elements. Ohm can then wirelessly connect to other sensors allowing for a network of sensors across cities and buildings.

‘ “Buildings that lack a traditional building management system due to age or budgets, simple and straightforward monitoring using Buddy Ohm can help realise efficiencies and saving they might not otherwise have access to,” Habib Heydarian, vice president of product and engineering said.’

https://www.theaustralian.com.au/bu...y/news-story/8fe4d394e9bd4eb03bba3c8290baa3d9

What are these ‘industry standard connectors’ that Mr McLauchlan mentions? And importantly can they be used in a live industrial environment?

To my way of thinking Mr McLauchlan’s description confirms that there must be some form of physical contact between the building’s electrical wiring system and the clamp of the probe. If that is the case then the question I put to taffyduke remains. Is it feasible in an industrial processing environment to shut down an electrical sub-board (that controls many of the essential electrical equipment that controls that very process of production) so it is safe for the electrician to install the probe clamps on their respective active wire(s) (what Buddy seems to describe as ‘Live’ wire in its somewhat meagre information sheet)? Because where else can an ohn probe be clamped to a particular circuit before it (the active wire) is stripped of its outer cable protection at its location behind the protective structure of the sub-board panel?

Perhaps some kind person can direct me to a schematic of the Buddy ohm system or even a few detailed images of an installed system in an industrial environment like the ones described by myself or taffyduke to dispel my doubts, at least on this technical matter.

Broosta

Expand

If you understand what a clip on CT Sensor is you should be satisfied.

BUD Price at posting: 18.5¢ Sentiment: Buy Disclosure: Held
11 Upvote

0 Great analysis

Reply

Top Stories

PGD

Peregrine extends high-grade gold shoot, sniffs anomalism at WA's Tin Can

PXX

Polarx discovers thick sulphide mineralisation at Alaskan Cu project

ASX200 dives as inflation clocks in at 4% – higher than 3.8% consensus

IBG

Ironbark eyes lithium and niobium opportunities with 7 new Brazilian projects

SS1

Sun Silver gets that drill to thrill feeling from high grade hits at Maverick Spring