Lets look at the facts,
Abra’s box-cut is about 190 m long (north-south) to a depth of 25 m and an average width of about 45 m (east-west). The southern wall that is the base of the box-cut is the location of the future main portal for the underground mine decline.
The First stage of a Box Cut is completed by an above ground mining company we used Mine Site Construction Services.
See further information below.
Abra Base Metals Project – Mine Development Works
Mine Site Construction Services was contracted to construct the Box Cut for the underground portal and carry out other preliminary groundwork not to cut the portal, the Under Ground Mining Company is contracted to do this work.
We all have to remember this is a work in progress and every company has a job to play in the final construction and safety of the mine. When the Portal goes in the Box Cut will only then be finished, building a mine has many stages and Abra is only starting.
Hope this clears up all the misunderstandings we have a Box Cut and it is still a work in progress.
all the best
FireflyOne
The writer's opinions are his own and do not constitute financial advice in any ways.Nothing here constitutes an investment recommendation nor should anything written here or published by myself be relied upon for any investment activities.I strongly recommend that you perform your own independent research and/or speak with a qualified investment professional before making any financial decisions.
(20min delay)