If Rock chips hold up with high grades, soil samples with elevated grades as another reference point would be even more of an indicator as to potential for high grades lower down (prior to drilling).
Found a reference for a company who had the following results & was able to declare an MRE of 37.4MT with 7.5% Lead, 18g/T silver
I think what is clear from this soil sampling mapping, particularly the filled in area, is reading mostly around the 20ppm to 50ppm.
I'll ask a few more questions to try to understand this a bit better tonight when I'm not at work, but this seems to be consistent with those results above where there was an MRE released, if not much higher (264ppm).
