OAK 0.00% 6.2¢ oakridge international limited

COMPAL SMART ASSISTANT Jupiter II Product Brief The Compal...

  1. 2,315 Posts.
    lightbulb Created with Sketch. 59
    COMPAL
    SMART ASSISTANT
    Jupiter II
    Product Brief
    The Compal Jupiter II, the all-in-one Smart Assistant, is the first
    offered as a completed system for the development on audio/
    image intelligence and home automation control.
    It is equipped with a Intel® Atom™ processor that gives you Intel
    level performance you’ve come to expect and quality you can
    count on. It includes 8GB (upgradable to 16GB) of on-board
    storage for programing your application.
    The Jupiter II features a far-field microphone array of 8
    microphones capturing individual voice several meters away. It
    hears your requests and questions from any direction across the
    room. Incorporate with 2.1 channels high quality speakers giving
    rich and crystal clear sound for both voice AI interaction and
    streaming music.
    The intelligence could be implemented on Jupiter II is not only for
    Virtual Personal Assistant (VPA), but also image one. The Jupiter II
    installs a wide angle camera, up to 130 degrees on horizontal
    view, allowing capturing clear images or high-definition video
    further image and video analytics, such as facial recognition,
    behavior observation, event detection, etc.
    6+2 PCS 10W+5W
    MIC ARRAY SPEAKERS
    FOV(H) 130°
    CAMERA
    802.11ac
    WIRELESS
    ZIGBEE
    Bluetooth
    Z-WAVE
    environmental
    SENSORS
    With plenty of wirelesses, include WiFi, Bluetooth, Zigbee, and
    Z-wave, you can connect with various smart home edge products,
    and interact and control among different types of wireless edge
    devices to customize your experience.
    Detecting the status of surrounding is also essential for the home
    automation. The Jupiter II contains six types of environmental
    sensors: temperature, relative humidity, pressure, ambient light,
    air quality (VOC), PIR motion, delivering diverse and full-range of
    information you need for the rule setting.
    The system is preinstalled with Linux Ostro. It is compatible with
    Intel® Smart Home Development Acceleration Platform (SHDAP)
    SDK. For the Intel SHDAP detail information, please contact
    regional Intel representative.
    Features & Appearance
    Top and Front Views
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    Ambient sensor
    LEDs indication ring
    Microphone
    Volume up/ down buttons
    Camera
    PIR sensor
    Thermal holes
    Speaker (Woofer)
    Speaker (Tweeter)
    Sound reflection corn
    Features & Appearance (continue)
    Technical Specifications
    Hardware Installation Instructions
    Bottom and Rear Views
    Processor
    • Intel® Atom™ processor x5-E8000
    • 2M Cache, up to 2.00 GHz
    1. Connect the device with power and notebook or PC.
    11. Rubber foot
    12. Reset hole
    13. MicroUSB (UART)*
    14. USB 2.0*
    15. DC-in power connector
    16. Stand
    *under the sticker
    System Memory
    • DDR3L 2G
    • Upgradable to 8GB
    11
    12
    13
    14
    15
    10
    Peripheral Connectivity
    • AzureWave AW-CBN178NF Dual
    Band Wireless 802.11a/b/g/n/ac,
    2x2
    • Bluetooth 4.2 +EDR/ BLE
    • SigmaDesign Z-wave
    • MMBNet Zigbee/ Zigbee Pro (2.0)
    • TELIT 4G LTE Module (optional)
    System BIOS
    • 128MB Flash EEPROM
    Hardware Management Feature
    • Voltage and temperature sensing
    • ACPI-compliant power
    management control
    Microphone
    • 6+2 microphone array
    • Far field >5m, 98%
    Storage Capability
    • 8GB eMMC soldered-down
    • Upgradable to 16GB
    16
    Speaker
    • 1 x Tweeter, 5W
    • 1 x Woofer, 10W
    Camera
    • 2 Megapixel
    • FOV (H): 130 degrees
    Top Panel Control
    • 1 x Volume Up
    • 1 x Volume Down
    Environmental Sensor
    • 1 x 3-in-1 Temperature,
    Relative Humidity, Pressure
    • 1 x Ambient light
    • 1 x Air quality (VOC)
    • 1 x PIR motion
    Notebook/ PC
    Expansion Capabilities
    (for code development)
    • 1 x MicroUSB (UART)
    • 1 x USB 2.0
    MicroUSB
    (UART)
    Mechanical Chassis Size
    • 281.18 mm x Ф 95.04~106.5 mm
    DC-in jack
    Power
    Pre-loaded OS
    • Linux Ostro
    Baseboard Power Requirements
    • 12V, 24W, wall-mount AC-DC power
    adapter
    • EU/ US AC adapter
    Environment Operating Temperature
    • 0ºC to +40ºC
    Storage Temperature
    • -20ºC to +70ºC
    Product Safety Regulations and
    Standards
    • EN 60950-1
    EMC Regulations and Standards
    • FCC Part 15
    • EN 55032/55024/301489
    • ICES-003
    This Class B digital apparatus complies
    with Canadian ICES-003.
    Cet appareil numérique de la classe B est
    conforme à la norme NMB-003 du Canada.
    Environmental Regulation
    • RoHS Directive 2011/65/EU
    • WEEE Directive 2012/19/EU
    2. The indication LEDs rings start running around 1 minutes.
    After the indication LEDs running off, the system boot up
    ready.
    3. Use Linux command to build up your own applications.
    Federal Communication Commission
    Interference Statement
    This device complies with Part 15 of the FCC Rules. Operation is
    subject to the following two conditions: (1) This device may not
    cause harmful interference, and (2) this device must accept any
    interference received, including interference that may cause
    undesired operation.
    This equipment has been tested and found to comply with the
    limits for a Class B digital device, pursuant to Part 15 of the FCC
    Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation. This
    equipment generates, uses and can radiate radio frequency
    energy and, if not installed and used in accordance with the
    instructions, may cause harmful interference to radio
    communications. However, there is no guarantee that
    interference will not occur in a particular installation. If this
    equipment does cause harmful interference to radio or television
    reception, which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the interference
    by one of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from
    that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for
    help.
    FCC Caution:
     Any changes or modifications not expressly approved by the
    party responsible for compliance could void the user's authority
    to operate this equipment.
     This transmitter must not be co-located or operating in
    conjunction with any other antenna or transmitter.
    FOR MOBILE DEVICE USAGE (>20cm)
    Radiation Exposure Statement
    This equipment complies with FCC radiation exposure limits set
    forth for an uncontrolled environment. This equipment should be
    installed and operated with minimum distance 20cm between the
    radiator & your body.
    FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
    Note: The country code selection is for non-US model only and is
    not available to all US model. Per FCC regulation, all WiFi product
    marketed in US must fixed to US operation channels only.
    Industry Canada Statement
     This device complies with Industry Canada license-exempt RSS
    standard(s). Operation is subject to the following two
    conditions:
    1) this device may not cause interference, and
    2) this device must accept any interference, including
    interference that may cause undesired operation of the
    device.
     Le présent appareil est conforme aux CNR d'Industrie Canada
    applicables aux appareils radio exempts de licence.
    L'exploitation est autorisée aux deux conditions suivantes:
    1) l'appareil ne doit pas produire de brouillage, et
    2) l'utilisateur de l'appareil doit accepter tout brouillage
    radioélectrique subi, même si le brouillage est susceptible
    d'en compromettre le fonctionnement.
     This Class B digital apparatus complies with Canadian ICES-003.
     Cet appareil numérique de la classe B est conforme à la norme
    NMB-003 du Canada.
     This device and its antenna(s) must not be co-located or
    operating in conjunction with any other antenna or transmitter,
    except tested built-in radios.
     Cet appareil et son antenne ne doivent pas être situés ou
    fonctionner en conjonction avec une autre antenne ou un
    autre émetteur, exception faites des radios intégrées qui ont
    été testées.
     The County Code Selection feature is disabled for products
    marketed in the US/ Canada.
     La fonction de sélection de l'indicatif du pays est désactivée
    pour les produits commercialisés aux États-Unis et au Canada.
     FOR MOBILE DEVICE (>20cm from body / low power)
    Radiation Exposure Statement
    This equipment complies with IC radiation exposure limits set
    forth for an uncontrolled environment. This equipment should
    be installed and operated with minimum distance 20cm
    between the radiator & your body.
     Déclaration d'exposition aux radiations:Cet équipement est
    conforme aux limites d'exposition aux rayonnements IC
    établies pour un environnement non contrôlé. Cet équipement
    doit être installé et utilisé avec un minimum de 20 cm de
    distance entre la source de rayonnement et votre corps.
     FOR WLAN 5GHZ DEVICE
    Caution:
    1) the device for operation in the band 5150-5250 MHz is only
    for indoor use to reduce the potential for harmful
    interference to co-channel mobile satellite systems;
    2) the maximum antenna gain permitted for devices in the
    bands 5250-5350 MHz and 5470-5725 MHz shall comply
    with the e.i.r.p. limit; and
    3) the maximum antenna gain permitted for devices in the
    band 5725-5825 MHz shall comply with the e.i.r.p. limits
    specified for point-to-point and non point-to-point
    operation as appropriate.
    4) the worst-case tilt angle(s) necessary to remain compliant
    with the e.i.r.p. elevation mask requirement set forth in
    Section 6.2.2(3) shall be clearly indicated.
    5) Users should also be advised that high-power radars are
    allocated as primary users (i.e. priority users) of the bands
    5250-5350 MHz and 5650-5850 MHz and that these radars
    could cause interference and/or damage to LE-LAN devices.
     Avertissement:
    1) les dispositifs fonctionnant dans la bande 5150-5250 MHz
    sont réservés uniquement pour une utilisation à l’intérieur
    afin de réduire les risques de brouillage préjudiciable aux
    systèmes de satellites mobiles utilisant les mêmes canaux;
    2) le gain maximal d’antenne permis pour les dispositifs
    utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit
    se conformer à la limite de p.i.r.e.;
    3) le gain maximal d’antenne permis (pour les dispositifs
    utilisant la bande 5725-5825 MHz) doit se conformer à la
    limite de p.i.r.e. spécifiée pour l’exploitation point à point et
    non point à point, selon le cas.
    4) les pires angles d’inclinaison nécessaires pour rester
    conforme à l’exigence de la p.i.r.e. applicable au masque
    d’élévation, et énoncée à la section 6.2.2 3), doivent être
    clairement indiqués.
    5) De plus, les utilisateurs devraient aussi être avisés que les
    utilisateurs de radars de haute puissance sont désignés
    utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les
    bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars
    pourraient causer du brouillage et/ou des dommages aux
    dispositifs LAN-EL.
    This device complies with Directive 2014/53/EU issued by the
    Commission of the European Community.
    A minimum separation distance of 20 cm must be maintained
    between the user’s body and the device, including the antenna
    during body-worn operation to comply with the RF exposure
    requirements in Europe.
    • Frequency bands and Powers
    a. Frequency band(s) in which the radio equipment operates:
    • BT: 2.400 - 2.483 GHz
    • WIFI: 2.412 - 2.472 GHz & 5.180 - 5.825 GHz
    • Zigbee: 2.400 - 2.500 GHz
    • Zwave: (EU)868.4 & 868.85 MHz
    (US) 908.4 & 916 MHz
    b. Maximum radio-frequency power transmitted in the
    frequency band(s) in which the radio equipment operates:
    [Module]
    • BT: 2 dBm +/- 2 dBm
    • WIFI: [2.4 GHz radio band] (11b) 11M 16 dBm (11g) 54M 14
    dBm (11n) HT40 11 dBm [5 GHz radio band] (11a) 54M
    13 dBm (11n) HT40 10 dBm (11ac) VHT80 8 dBm
    • Zigbee: 18 dBm
    • Zwave: 4 dBm +/- 2 dBm
    [Antenna gain]
    • BT: 3.89 dBi
    • WIFI: [2.4 GHz radio band] (Main) 5.29 dBi (Aux) 3.89 dBi [5
    GHz radio band] (Main) Max. 5.27 dBi (Aux) Max. 3.46
    dBi
    • Zigbee: 0.5 dBi (ceramic chip antenna on module)
    • Zwave: 0.4 dB
    • WLAN 5GHz
    Operations in the 5.15-5.35GHz band are restricted to indoor
    usage only.
    • Declaration of Conformity
    We, Compal Electronics, INC.,
    Address: No. 581, Ruiguang Rd., Neihu District, Taipei City 11492,
    Taiwan (R.O.C.)
    declare that the below mentioned radio equipment type is in
    compliance with Directive 2014/53/EU.
    Model Name: EIH3
    Intended Use: Smart IOT
    Software Version: 3401.R.4418.17040NB
    Company Name: Telefication B.V.NB
    Company Number: 0560
    The full text of the complied standards are as below listed:
    1. Health (Article 3.1(a) of Directive 2014/53/EU)
    Applied Standard(s):
     EN 62311 : 2008
     EN 62479 : 2010
    2. Safety (Article 3.1(a) of Directive 2014/53/EU)
    Applied Standard(s):
    FCC ID: GKRA30EIH30B03
    Contains TLZ-CM389NF and XFFZ357PA20
    Model name: EIH3
    Trade name: Compal
     EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A2: 2013
    3. Electromagnetic compatibility (Article 3.1 (b) of Directive
    2014/53/EU)
    Applied Standard(s):
     EN 301 489-1 V2.1.1 / -17 V3.1.1
     Draft EN 301 489-3 V2.1.0
     EN 55032: 2012/ AC: 2013 + EN 55024: 2010
    Trade Name: Compal
    IC ID: 2533B-A30EIH30B03
    Contains 6100A-CM389NF and 8365A-Z357PA20
    Model Name: EIH3
    Manufacturer: Compal Electronics Inc.
    Manufacturer Address: No. 581, Ruiguang Rd., Neihu District,
    Taipei City 11492, Taiwan.
    4. Radio frequency spectrum usage (Article 3.2 of Directive
    2014/53/EU)
    Applied Standard(s):
     EN 300 328 V2.1.1
     Draft EN 301 893 V2.0.7
     EN 300 220-1 V3.1.1/ -2 V3.1.1
    In the EU, this symbol means that this product must
    not be disposed of with household waste. It is your
    responsibility to bring it to a designated collection
    point for the recycling of waste electrical and
    electronic equipment. For more information, please
    contact your local waste collection centre or your
    point of purchase.
 
watchlist Created with Sketch. Add OAK (ASX) to my watchlist
arrow-down-2 Created with Sketch. arrow-down-2 Created with Sketch.