Cold Weather Concrete, page-2

First 2 Last

Share
Profile

Follow
RULES

1,686 Posts.

146

15/05/16

07:34

Post #: 17769541
Share

Originally posted by horse976 ↑

Cold Weather Concrete

WHY IS COLD WEATHER A PROBLEM?

There are two main problems with concrete in cold weather:

Concrete can freeze before it gains strength which breaks up the matrix

Concrete sets more slowly when it is cold—very slow below 50°F; below 40°F the hydration reaction basically stops and the concrete doesn't gain strength

But these are concrete temperatures not air temperatures. So when it's cold, we need to protect the concrete until it can handle the cold on its own. The general rule is that once the concrete has gained strength to about 500 psi then it's OK. The magical thing that happens is that at almost the same time that the concrete achieves 500 psi compressive strength, hydration of the cement has consumed enough of the water in the original mix so that even if it does freeze, there's not enough water left in the pores to damage the concrete. With most concrete, even at 50°, this happens during the second day.

To help it reach that 500 psi strength, then, there are two things we can do in cold weather: Change the mix to get it to set more quickly or protect the concrete from the cold—or more likely, both.

Changes to Concrete Mix During Cold Weather

Many of the problems with cold weather can be overcome by the ready mix producer. Here are a few things to keep in mind:

Hot water-Your ready mixed concrete producer will usually have, and use, hot water in the concrete when the weather turns cold. Most producers will try to have the concrete be at least 65°F when it leaves the plant, which is generally good enough depending on air temperature and thickness of the concrete element.

Specify the slump at less than 4 inches and use air entrained concrete to reduce bleeding.

Accelerators-Since colder weather leads to colder concrete, the set time can be delayed. Accelerators added to the concrete can keep it on schedule. Addition of 2% (by weight of cement) of calcium chloride is the traditional way to accelerate the hydration reaction-it is very effective and reasonably cheap. But-a big but-that much chloride can lead to corrosion of any steel embedded in the concrete (like rebar) and it can lead to a mottled surface appearance with colored concrete.

Nonchloride accelerators are widely available and are very effective. They won't discolor the concrete but they are a bit expensive. Don't make the mistake of thinking that accelerators are anti-freeze agents-they are not, they simply increase the rate of the hydration reaction.

Fly ash-You should typically stay away from using fly ash or slag cement in cold weather, since those materials set up more slowly and generate less internal heat; slag can cause the same effect.

To make the reaction a bit hotter, the ready mix producer can add some extra cement (typically an extra 100 pounds per cubic yard) or can use Type III (high-early strength) cement, which hydrates more rapidly.

Be careful with water reducers in cold weather, since they can slow the set time. Besides, you seldom need water reduction with cooler concrete since the cooler temperatures prevent slump loss.

For admixtures added at the job site, don't use them if they have frozen. The chemicals may have separated.

Expand

You obviously know a bit about concrete and you hold shares,what is it about Edencrete that you like and what do think (in your opinion)is scope of the market for Eden.

EDE Price at posting: 30.5¢ Sentiment: Buy Disclosure: Held
Upvote

0 Great analysis

Reply

Top Stories

LDX

Lumos Diagnostics surges 140% on major US contract deal

ASX Market Close: Why are we red today? Because US CPI's at 3%

LU7

Lithium Universe targets silver boom with breakthrough solar recycling tech

Listen: HotCopper Wire Podcast 018 – Potatoes, TACOs, and the $120M helicopter heist

LIS

Li-S Energy the latest microcap to pivot to US defence market

First 2 Last

Add to My Watchlist

What is My Watchlist?

A personalised tool to help users track selected stocks. Delivering real-time notifications on price updates, announcements, and performance stats on each to help make informed investment decisions.

(20min delay)
Last 0.2¢		Change 0.000(0.00%)		Mkt cap ! $8.219M

Open	High	Low	Value	Volume
0.2¢	0.2¢	0.2¢	$70	35K

Buyers (Bids)

No.	Vol.	Price($)
87	208408573	0.1¢

Sellers (Offers)

Price($)	Vol.	No.
0.2¢	13979114	8

View Market Depth

No.	Vol.	Price($)
86	207797419	0.001
0	0	0.000
0	0	0.000
0	0	0.000
0	0	0.000

Price($)	Vol.	No.
0.002	13735636	7
0.003	38183101	35
0.004	12869543	13
0.005	3075777	7
0.006	1193494	4

Last trade - 16.10pm 16/07/2025 (20 minute delay)

EDE (ASX) Chart

Cold Weather Concrete, page-2

Lumos Diagnostics surges 140% on major US contract deal

ASX Market Close: Why are we red today? Because US CPI's at 3%

Lithium Universe targets silver boom with breakthrough solar recycling tech

Listen: HotCopper Wire Podcast 018 – Potatoes, TACOs, and the $120M helicopter heist

Li-S Energy the latest microcap to pivot to US defence market

Featured News

Buyers (Bids)

Sellers (Offers)

Featured News

Cold Weather Concrete, page-2

Top Stories

Lumos Diagnostics surges 140% on major US contract deal

ASX Market Close: Why are we red today? Because US CPI's at 3%

Lithium Universe targets silver boom with breakthrough solar recycling tech

Listen: HotCopper Wire Podcast 018 – Potatoes, TACOs, and the $120M helicopter heist

Li-S Energy the latest microcap to pivot to US defence market

Featured News

Buyers (Bids)

Sellers (Offers)

Featured News