disappointment reconciled - lets look forward

Below is one "iron in the fire", will be a very interesting result especially if we get good grades over a length of 550 metres. I would say that will put a bit of fire under the SP

"The first FNT/OTML JV hole was vertical and located on the same drill pad as historic hole MD23; it was
designed to confirm the historic near surface mineralisation and to test the depth extent of the system. The
second hole is drilling at -60 degrees inclination to the north, from the same site. Visible copper and
molybdenum mineralisation was noted to about 550m downhole, then the abundance decreased to the end
of hole, where several massive chalcopyrite veins were noted.'