That post is incorrect the hole we drilled here is smaller than Watsia. The tubing is smaller also meaing flow will be constrained. Ya has answered this.
below from Ya this is spot on
Waitsia is 50 sq kms with numerous faults. They left the HCS under 2C as it flowed only at W1 & booked most of the gas in the Kingia which flowed on all 5 wells, including Senecio-3 'discovery' well. Porosity cut-off's were applied. 7-11% range was deemed tight, whilst 11+% was good. At WE-2, I'd like to see the Kingia flow 10+ mmcfd here given its depth & tubing constraints etc & then subsequent plans to drill WE-3 next year mayb as the rig will b released post testing for B/Deep-1.
Do we need West Erregulla 2 to reach 90 mmscf/d, page-3
Add STX (ASX) to my watchlist
 (20min delay)
|
|||||
|
Last
21.3¢ |
Change
0.023(11.8%) |
Mkt cap ! $600.7M | |||
| Open | High | Low | Value | Volume |
| 20.0¢ | 21.5¢ | 20.0¢ | $2.838M | 13.75M |
Buyers (Bids)
| No. | Vol. | Price($) |
|---|---|---|
| 65 | 2194686 | 21.0¢ |
Sellers (Offers)
| Price($) | Vol. | No. |
|---|---|---|
| 21.5¢ | 1606443 | 54 |
View Market Depth
| Last trade - 15.03pm 11/06/2024 (20 minute delay) ? |
|
|||||
|
Last
21.3¢ |
Change
0.023 ( 11.3 %) |
||||
| Open | High | Low | Volume | ||
| 19.8¢ | 21.5¢ | 19.8¢ | 5018834 | ||
| Last updated 15.24pm 11/06/2024 ? | |||||
| STX (ASX) Chart |