drill results, page-8

The results werent bad...were some good ones mixed with bad ones.

They went down because 5 of 6 holes were duds with the chemical assays only showing strong results in hole GDD001.

The mineralisation on this hole also didn't start untill 100 meters deep down to in excess of 300 meters. Some decent grades were reported on this hole though with 31 meters at 346ppm from 194 meters to 225 meters depth and 10 meters at 377ppm from 135 meters to 145 meters depth..

The following holes tested via chemical assays were GRC021, GRC023, GRC04, HDD026 and HDD027. The results weren't the best with poor widths and low grade.

On the other hand the Garnet Valley spectrometer results were quite good with mineralisation from the surface to depths of around 80 meters. Some were in excess of 100 meters. The key with these results is that it was from surface which would be an easy open cut bulk tonnage operation for Garnet Valley.

The Garnet Valley results were quite good IMO.