EdenCrete Testing, page-21

There’s a two fold error in the conversion of fluid ounces to L in the Edencrete recipe contained in that article.


“Application Guidelines
EdenCrete500 should be employed at a dosage rate of 30 to 150 fluid ounces per 100 pounds (2.0 L to 10.0 L per 100 kg) of total cementitious. EdenCrete500 has a water content of 85-90%. EdenCrete500 can be at added at the hopper of a concrete mixing truck or in a central plant mixer. The EdenCrete500 should be added with the tail water during the mixing process. Once added, mix the concrete at the maximum mixing speed for approximately 70-100 revolutions. It is the responsibility of the end user to conduct trial batches to ensure the adequate concrete mixture propor tions are consistent with the concrete proper ties needed. Please contact your local Eden Innovations sales representative for assistance in using EdenCrete500. “

30 fluid ounces (of pure water) is about 900 ml not 2.0 L.
Further, since the density is 1.2 , 30 Fl Ozs of Edncrete 500 is only 25 ml.
Hopefully it should be 1.0L to 5L rather than 60 to 300 fluid ounces per 100kg