Hi Alex, now I understand reverse circulation and have some feedback from my mate (chatGPT) regarding failure of reverse circulation removing drilling fluids from the drill string.
Several reasons could prevent reverse circulation from effectively removing drilling fluid from the drillstring:
1. **Fluid Viscosity**: If the drilling fluid is too viscous, it may resist being lifted out of the drillstring and hinder effective reverse circulation.
2. **Rate of Circulation**: If the rate of reverse circulation is insufficient, the drilling fluid may not be lifted out quickly enough, leading to accumulation in the drillstring.
3. **Drillstring Configuration**: The design and configuration of the drillstring, including the size and arrangement of drill pipe and other components, can affect how effectively fluid can be removed during reverse circulation.
4. **Blockages or Restrictions**: Any blockages or restrictions within the drillstring or the wellbore itself can impede the flow of fluid during reverse circulation.
5. **Pump Capacity**: The pumping capacity of the equipment used for reverse circulation needs to match the requirements of the wellbore and drillstring. Insufficient pump capacity can result in incomplete fluid removal.
6. **Drilling Fluid Properties**: Certain properties of the drilling fluid, such as high solids content or chemical additives, can make it more difficult to remove using reverse circulation methods.
7. **Operational Practices**: Inadequate operational practices, such as improper sequencing of actions during the drilling process or incorrect procedures for initiating and maintaining reverse circulation, can contribute to inefficiencies.
8. **Wellbore Conditions**: Variations in wellbore conditions, such as deviations, losses, or gains in circulation pressure, can affect the effectiveness of reverse circulation.
Addressing these factors typically involves careful monitoring of drilling parameters, adjusting fluid properties if feasible, ensuring equipment compatibility, and adhering to recommended operational procedures to optimize reverse circulation efficiency.
AP we need ANSWERS
- Forums
- ASX - By Stock
- MAY
- Formation Damage and Remedies. Published info
Formation Damage and Remedies. Published info, page-21
-
-
- There are more pages in this discussion • 14 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add MAY (ASX) to my watchlist
(20min delay)
|
|||||
Last
3.4¢ |
Change
-0.002(5.56%) |
Mkt cap ! $114.5M |
Open | High | Low | Value | Volume |
3.5¢ | 3.6¢ | 3.3¢ | $185.6K | 5.393M |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
5 | 842480 | 3.3¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
3.4¢ | 148089 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
5 | 842480 | 0.033 |
3 | 1317000 | 0.032 |
6 | 799800 | 0.031 |
7 | 435332 | 0.030 |
7 | 584672 | 0.029 |
Price($) | Vol. | No. |
---|---|---|
0.034 | 148089 | 1 |
0.038 | 852430 | 6 |
0.039 | 819682 | 5 |
0.040 | 1034244 | 6 |
0.041 | 965955 | 5 |
Last trade - 16.10pm 07/10/2024 (20 minute delay) ? |
Featured News
MAY (ASX) Chart |