The amount of graphite concentrate needed to make 1kg of battery anode material for a typical lithium-ion battery for an electric vehicle (EV) can vary depending on the specific battery design and the quality of the graphite used. However, a rough estimate is that it takes about 2-5kg of raw graphite concentrate to produce 1kg of battery anode material.
The graphite concentrate is typically purified and processed to remove impurities and increase its carbon content before it is used to make battery anode material. This purification and processing step can result in some loss of material, which is why it takes more raw graphite concentrate to produce 1kg of battery anode material than the actual amount of anode material itself.
It's important to note that the amount of graphite needed in a lithium-ion battery anode can vary depending on the specific battery design and the desired performance characteristics. Some batteries may use more or less graphite, depending on factors such as energy density, power output, and cycle life.
- Forums
- ASX - By Stock
- General Discussion IG6
The amount of graphite concentrate needed to make 1kg of battery...
-
- There are more pages in this discussion • 155 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add IG6 (ASX) to my watchlist
|
|||||
Last
7.1¢ |
Change
0.006(9.23%) |
Mkt cap ! $13.74M |
Open | High | Low | Value | Volume |
7.1¢ | 7.1¢ | 7.1¢ | $311 | 4.386K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 25000 | 7.0¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
8.5¢ | 25575 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
1 | 25000 | 0.070 |
1 | 150000 | 0.065 |
1 | 214000 | 0.064 |
1 | 16377 | 0.061 |
5 | 171000 | 0.060 |
Price($) | Vol. | No. |
---|---|---|
0.085 | 25575 | 1 |
0.092 | 107500 | 1 |
0.095 | 1500 | 1 |
0.096 | 48955 | 1 |
0.110 | 71336 | 1 |
Last trade - 15.58pm 02/09/2024 (20 minute delay) ? |
Featured News
IG6 (ASX) Chart |