Maverick,
1) If a deposit only has an oxide resource, it is usually because the sulphide deposit beneath is too low grade to meet the resource cut-off. For example, there may be marginally economic copper porphyry deposits that have an oxide/supergene zone grading 0.4-0.5% Cu, but the sulphide is only 0.2-0.3% Cu, therefore is not economic to even quote as a resource. Geologically speaking, oxide deposits usually have sulphide "roots" to them. Laterite deposits are the exception (for example, a nickel laterite deposit is confined to only the lateritic portions).
2) Depends entirely on the size, recovery and geometry of the orebody. For large throughput operations (+200,000 Oz per annum), probably 0.3-0.5 g/t. For smaller operations or narrower orebodies (higher strip ratio), perhaps higher.
3) If we are talking about gold, oxide ore is usually free-milling and easy to recover (with cyanide and CIL). However, if it is encased in a banded-iron formation then perhaps it costs more to grind it (more abrasive, harder material). With oxide deposits, whether the material is free-dig, or if it must be blasted has a large impact on operating costs.
Apologies for the late reply. Any other questions, don't hesitate.
Desertpunter
- Forums
- Commodities
- Gold ore types?
Gold ore types?, page-11
-
- There are more pages in this discussion • 11 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Featured News
The Watchlist
CCO
THE CALMER CO INTERNATIONAL LIMITED
Anthony Noble, CEO
Anthony Noble
CEO
SPONSORED BY The Market Online