Regards to TG, does anyone know the saleable parameters?I can...

Regards to TG, does anyone know the saleable parameters?

I can see for ceramic grade 1tonne bags as well as 25kg bags.

crush size is almost dust, at 0.5mm. And variance is much more quantified though 0.5mm fines is indicated at 100%

Spodumene % is

7.2% and described as “premium”, by Albermale online

https://www.albemarle.com/storage/components/T402211.PDF

And there is another with crush size 0.075mm

https://www.albemarle.com/storage/components/T402212.PDF

———————————

6.8% SC

crush size of 0.075mm

Fe2O3 at max 0.20%

SC6.8

https://www.albemarle.com/storage/components/T402209.PDF

——————————-

SC5 min 5%

Offered in 1-2tonne bags

Crush size

0.850mm with a fraction 5% only 0.106mm ‘dust’ variance

Fe2O3 0.13%

https://www.albemarle.com/storage/components/T402204.PDF

———_

SC6.5 min 6.5%

Crush size is 1.0mm

Fe2O3 is 0.25%

https://www.albemarle.com/storage/components/T402203.PDF

———-

From available online information, I did not find a SC6.0 however Greenbushes seems to be targeting that grade for its hydroxide.

So what could all this mean for AVZ if these Albermale specification sheets is indicative of Fe versus Crush size?

The crush size of 10mm, how on earth is it possible to get technical grade SC Fe below 0.5 even with flotation and LIMS?

As indicated by above specifications a fine grind size well below AVZ MET testing was executed to realise high grade products.

AVZ manono Roche Dure is looking very interesting with grades already hovering around 6% with much higher grind sizes, Fe assayed feedstock ore averaged 0.34%

https://static1.squarespace.com/static/5934d2ae6b8f5beeb5ba23f3/t/5d47883af352bf000134f6f3/1564969030778/20190805+Met+Process+Testwork+FINAL+-+ASX.pdf

With flotation and LIM circuits this looks very doable compared to Albermale (Greenbushes) product, the question is for AVZ how Tier one can it be with low cost recovery.