I think the grades are OK. You're probably looking at a chunk of the Earth 400x400x400m (at least!), which is probably a good 200Mt at around 0.4% Cu. You'd tackle this with a 10mt per annum open cut mine and would produce around 40,000tpa copper, probably with costs around $1.50/lb.
If you found that the strike length of 1200m+ was all equally mineralised you'd get 600Mt and would probably start looking at 20Mtpa operations, etc etc.
May I remind everyone about EQN, which is running a mine on these grades.
Of course, AIM has to stay alive to see mining take place, but so far so good. I think these drilling results are excellent, and I'd be buying this if everything wasn't so knackered right now.
- Forums
- ASX - By Stock
- mumbwa
I think the grades are OK. You're probably looking at a chunk of...
-
- There are more pages in this discussion • 2 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
NEWS
Antler Copper Project hits major permitting milestone – air quality permit advances to final review
CC9
Chariot Corporation (ASX:CC9) refines Black Mountain strategy, launching Pilot Mine to seize U.S. lithium opportunity
Add AIM (ASX) to my watchlist
(20min delay)
|
|||||
Last
80.0¢ |
Change
-0.010(1.23%) |
Mkt cap ! $167.0M |
Open | High | Low | Value | Volume |
81.0¢ | 81.0¢ | 77.0¢ | $159.2K | 201.5K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
1 | 700 | 77.5¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
80.0¢ | 3649 | 1 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
3 | 205958 | 0.770 |
5 | 50087 | 0.760 |
5 | 9200 | 0.750 |
1 | 1371 | 0.730 |
4 | 18695 | 0.700 |
Price($) | Vol. | No. |
---|---|---|
0.810 | 18715 | 1 |
0.820 | 42428 | 3 |
0.825 | 3636 | 1 |
0.830 | 25000 | 1 |
0.840 | 29800 | 1 |
Last trade - 16.10pm 04/10/2024 (20 minute delay) ? |
Featured News
AIM (ASX) Chart |