The only implication that I can see for the Brainchip NaNose end...

The only implication that I can see for the Brainchip NaNose end product is that it amplifies the huge technological leap which AKIDA technology allows and points to how quickly we could see it functioning in the real world.

I have extracted the following from the Breathonix web site. Unfortunately it would not include the photo of the actual device but it consists of the device you breath into that is held on a flexible arm which is connected by a large flexible pipe to a large box where the processing takes place and this box is attached to a laptop. The large box alone weighs around 125 kilos.

It is worthwhile going to the Breathonix Pty Ltd web site to see the actual device and then visualise it standing against a Brainchip/NaNose hand held device that does exactly the same thing with higher reported accuracy.

Also it should be noted that this Breathonix device is not being used as a diagnostic device as any positive result has to be referred for PCR testing to confirm that the person is Covid positive.

The implication being that as the the Breathonix device is being rolled out (no pun intended) on a conditional basis to increase screening rates despite this issue of accuracy the same approach is likely with Brainchip/NaNose.

It really will wake up the world to the possibilities AKIDA technology has unlocked:
—————————————————————-
“BreFenceTM Go COVID-19 Breath Test SystemRapid Breath Test for COVID-19 DetectionThe BreFenceTM Go is a real-time, non-invasive COVID-19 Breath Test System intended for the qualitative detection of volatile organic compounds (VOCs) in the human breath. The VOCs being detected are indicative of the presence of COVID-19 disease. The BreFenceTM Go is intended for use in point-of-care settings, hospitals, clinical laboratories and clinical settings by trained operators. Operators of this system need not be trained healthcare professionals. Positive results indicate the presence of COVID-19 infection. Clinical correlation with patient history and other diagnostic information may be required to determine infection status.How it works1. Enter unique test ID2. Start and stop sampling123Negative results should be treated as presumptive, although they do not rule out COVID-19 infection and should not be used as the sole basis for treatment or patient management decisions, including infection control decisions. 3. Send for analysis4. Receive results Sample BreathInstruct user to exhale into a disposable one-way valve mouthpiece.Real-time analysisThe BreFenceTM Go Test System measures and analyses VOCs biomarkers in the breath.Instant resultsObtain the results in 60 seconds with just 3 clicks - Start, Stop and Send.This test will be for use under HSA’s Provisional Authorisation.Further information about the product including clinical evaluation is available on request. Why Breathonix? AcceleratedTotal turnaround time from breath sampling to results takes less than 60 seconds.AccessibleBreath test is non-invasive and only requires a single exhalation from the subject.AffordableEach breath test is significantly more affordable than a PCR swab or a Rapid Antigen test.AccurateInitial clinical trial with National Centre for Infectious Diseases of Singapore has shown promising results of 93% sensitivity and 95% specificity with machine learning. BreFenceTM Go COVID-19 Breath Test System BreezTM Breath Sampler Temperature Controller Mass SpectrometerBreathOps Software ConsumablesMouthpiece + MouthShield Technical Specification Dimensions and WeightMass SpectrometerBreath Sampler Temperature ControllerBreath Sampler + Temperature ControllerElectrical DataMass SpectrometerTemperature Controller3 Power Outlets RequiredEnvironmental ConditionsMass SpectrometerBreath SamplerSystemTotal time from sampling to result SoftwareContact InformationWidth x Height x Depth: 60 x 91 x 80cm Weight: <125kgLength x Diameter: 33 x 7cmLength x Width x Height: 27 x 36 x 12cm Weight: <8kgOperating Voltage: 100-115 V Operating Frequency: 50/60 Hz Maximum power consumption: <1500 WOperating Voltage: 230 VAC Operating Frequency: 50Hz• Mass Spectrometer• Temperature Controller • Laptop / DesktopOperating Temperature: indoor; 15° C- 30°COperating Humidity: <80% RH, non-condensingSetup on flat ground: <10° inclinationFree space for ventilation: 40cm free space at front and back of instrumentOperating Temperature: 15° C- 35°COperating Humidity: 20-85% RH, non-condensing Well ventilated areaFree of excessive dustFree of combustible gases<60 secondsOver-the-air (OTA) analysis, updates and calibrationBreathonix Pte Ltd 83 Science Park Drive [email protected] +65 6811 2133 The Curie, #02/03-04 www.breathonix.com Singapore 118258 “
—————————————————————

My opinion only DYOR
FF



AKIDA Ballista