Not to get too bogged down in BTR but I also note the...

Not to get too bogged down in BTR but I also note the following:

In order to provide sufficient rock mass for the metallurgical test work purposes across all oxidation states at theDelta (oxide, transitional and fresh), CTWMET004 was drilled sub-parallel to the ore body at Delta

CTWMET004 drilled sub-parallel to ore-body for metallurgical testwork purposes

The large/continuous mineralised interval (34.4m @ 7.94g/t Au from 43.5m) returned in CTWMET004 drilledsub-parallel to the previously defined ore-body will provide requisite material for planned metallurgical testwork.

CTWMET003 and CTWMET004 are designed “down dip”and sub-parallel with the ore body and with a larger diametercore to collect sufficient mineralised material for metallurgicaltestwork purposes.

CTWMET003 and CTWMET004 are designed “down dip”and with a larger diameter core to collect sufficient mineralisedmaterial for metallurgical testwork purposes

Or as Rovira said himself: "Either drill one Met hole down the ore body, or drill 3 diff holes in ox, trans and fresh zones for 3x the cost to deliver the same outcome to met lab."