Brainybull, I think if you look at the map you will see it is...

Brainybull, I think if you look at the map you will see it is marked in feet not metres.

3.6 mmcfd was encountered at -4,734' (feet)
1.6 mmcfd was encountered at -4,962' (feet again)

The negative sign denotes a reference wrt to sea level, i.e. less than sea level (datum 0) also shown on the map.

The actual intersection levels in terms of feet is simply the GL (ground level - also referenced wrt the sea level (datum 0) - hence its positive sign) less the drill depth below the sea level, i.e. for PB1:

5,080' (feet) - (-4,734') = 9,814' (feet)

If you pull up one of the old PB1 drill reports you will see that this is the exact depth that upper Ismay was encountered. So the intersections on the map are for Ismay not for the deeper formations.

Again PB3 is only targeting Ismay and Desert Creek.

Hardly outrageous - hope this helps you.

Cheers
SBC