I highly encourage everyone to re-read the kingsrose website on...

I highly encourage everyone to re-read the kingsrose website on Porsanger and look  at the nice size of the FLEM plate at one of the sites up for potential drilling.

“Exploration by Kingsrose to date has identified a 350m by 400m, shallow conductive body at Karenhaugen, immediately down dip from mineralised outcrop. A new zone of mineralised intrusives was identified in the SW part of the licence area.”

Additionally, we obviously know of the historical drilling results that sit idly waiting to be re drilled and re explored

“Porsanger was drilled in the 1990s by the Norwegian Geological survey as part of a copper exploration program. The historical drilling intercepted broad, low to moderate grade, palladium dominant PGE mineralisation with copper and rare nickel mineralisation in two small outcropping intrusions called Porsvann and Karenhaugen. No follow up exploration was conducted. Historical intercepts include:

• 45 metres at 1.4 g/t 4E and 0.1 % Cu (0.9 g/t Pd, 0.4 g/t Pt, 0.04 g/t Rh and 0.06 g/t Au) from 65 metres (hole PV-01), including
  • 15 metres at 2.6 g/t 4E and 0.2 % Cu (1.8 g/t Pd, 0.7 g/t Pt, 0.08 g/t Rh, 0.09 g/t Au) from 90 metres
• 75 metres at 0.9 g/t 4E and 0.1 % Cu (0.6 g/t Pd, 0.3 g/t Pt, 0.03 g/t Rh, 0.03 g/t Au) from 16 metres (PV-04) including
  • 1 metre at 6.9 g/t 4E, 0.5 % Cu and 0.1 % NiS (Nickel Sulphide) (5.1 g/t Pd, 1.5 g/t Pt, 0.15 g/t Rh, 0.23 g/t Au) from 34 metres”

a couple drill holes at depth down dip in the middle of those targets could return some great hits! Here’s to hoping the high grade zones increases at depth.

https://www.kingsrose.com/projects/porsanger