Project information with Graphitic Schist iterations, page-338

WKT Official ASX Announcement 28th Feb 2018 : Update Ore Reserve.

***Mining dilution of 5% was allowed for in the mine design and schedule. Considering the width of the
orebody, typically 2 to 10m wide, mining envelopes will be accurately controlled and conducive to
selective mining of high-grade ore, low grade ore and waste.
The ore and waste are visibly distinguishable. All these factors contribute to facilitating accurate mining of
the Lindi high grade ore.
An allowance was made for ore loss to account for ore not recovered during the mining process. This may
be due to inefficient grade control, discontinuity or inaccurate mining.
Based on experience from other open pit operations with similar geometry, ore loss was set at 5%, or
conversely 95% ore recovery.****

WKT Official ASX Announcement 19th Dec 2018 : Londi Jumbo Graphite Mineral Resource Increase By 41%.

****Trench results include LJTR04 – 54m @ 22.4% TGC from surface including 10m
@ 32.9% TGC from 28m and LJTR06 – 55 @ 14.9% TGC from 12.5m including
17.5m @ 22.3% TGC from 34m.****

***Drill results also prove resource is open ended in all directions.****

Can someone explain to me how a 54m core sample @ an average 22.4% TGC with a typical ore body of between 2m and 10m is thinly veined????? Core samples are also drilled at an angle of 60 degrees industry standard for optimal results. I'll stick with Official ASX Announcements any day. NLN.