New to hotcopper so have been going through the threads. Lots of reading!
One poster mentioned that Klaus was overstating the tin credits, that it was difficult to separate the tin from the lithum
so I did some googling and found this from the 911metallurgy website under
" Processing Spodumene by Froth Flotation for Lithium Extraction"
Jigging Separation Process Principle
The Mineral Jig is not just another gravity Separation Process. It is a highly efficient selective pulsator and concentrating machine which has the ability to treat an unclassified feed separating solids having only a slight differential in settling rates, with only a minimum addition of water. The jig removes a heavy mineral concentrate such as tin and gold.
Mineral Jig Concentrator
The Duplex Mineral Jig Machine belongs to gravity concentrating device that separates material based on differing densities of the material. The Jig is widely used in concentration of heavy minerals such as tin, gold, tungsten, manganese and barite. The 911MGTK-XCT Laboratory Mineral Jig Machine is an ideal instrument for research of beneficiation of ferrous metal and nonferrous metal.
New to hotcopper so have been going through the threads. Lots of...
-
- There are more pages in this discussion • 9,101 more messages in this thread...
This thread is closed.
You may not reply to this discussion at this time.
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)